Epson PowerLite 905 Kullanım Kılavuzu - Sayfa 26

Yazılım Epson PowerLite 905 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Epson PowerLite 905 50 sayfaları. Powerlite 905; powerlite 915w
Ayrıca Epson PowerLite 905 için: Hızlı Kurulum (4 sayfalar), Ürün Destek Bülteni (5 sayfalar), Broşür (4 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Uygunluk Beyanı (4 sayfalar), Broşür (4 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Hızlı Kurulum (4 sayfalar)

Using Multi-Screen Display

s "Adjusting the Virtual Display"

Click Start, select Programs (or All Programs), EPSON

Projector, EasyMP Network Projection, and then click

Add-Remove EPSON Virtual Display.

The Add-Remove EPSON Virtual Display screen is displayed.

Select the virtual display you want to use.

Up to four monitors can be added. In this example, a single virtual

display is to be used. When setting multiple virtual displays, select

as many displays as necessary.

Any one of the displays can be selected.

Click OK.

When you click OK, the drivers for the virtual display are enabled.

At this point, it is normal for the display to flicker. Wait for the

Add-Remove EPSON Virtual Display screen to close.

p.26

Adjusting the Virtual Display

After starting EasyMP Network Projection, the procedure for setting up

the virtual displays differs for Windows and Mac OS. The procedures are

explained separately below.

Check the following points before starting EasyMP Network Projection

when connecting via Wireless LAN. If the following points are not set

correctly, Multi-screen display cannot be used.

• The SSID for the computer and each projector must be the same. (For

Quick Connection Mode)

• The wireless LAN system for the computer and each projector must be the

same.

You can modify the SSID and wireless LAN system for the projector from

the projector's Network menu.

See your projector User's Guide for details.

For Windows

Click Start, select Programs (or All Programs), EPSON

Projector, EasyMP Network Projection, and then click

EasyMP Network Projection V2.XX to start EasyMP Network

Projection.

Select Quick Connection Mode or Advanced Connection

Mode, and then click OK.