Toshiba 19BV500B Kullanıcı El Kitabı - Sayfa 11

TV Toshiba 19BV500B için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba 19BV500B 36 sayfaları. 19" bv series

Sayfayı Yazdır

Initial Installation - Digital & Analogue

Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the

aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 4.

Connect the mains plug and switch the TV into standby

using the side On/Off switch. Press any numbered

or standby button on the remote control, then the

language selection menu will be displayed. This

screen will appear the first time that the television

is switched on and each time the television is reset.

By pressing the Up or Down buttons highlight the language

you want to set and press OK button. Afterwards,the

following message will be displayed on the screen:

Select Yes by using Left or Right buttons and press

OK to continue. The Auto tuning screen will appear

and the television will start to search for available

stations. The progress bar will move along the line.

You must allow the television to complete the search.

A f t e r A u t o m a t i c S e a r c h i s c o m p l e t e d , t h e

following message asking for analogue channel

search appears on the screen. Select Yes by using

Left or Right buttons and press OK to continue.

Select your Country, Language and Text language by

using navigation buttons. Press OK or RED button

to continue. To cancel, press the BLUE button.

Note:

•

For proper functioning of digital teletext in DTV mode, you

should set country as UK in analogue AUTO Programme

(for UK broadcasts only).

•

Do not turn off the TV while initializing first time

installation.

Auto Tuning

As new services are broadcast, it will be necessary to re-tune

the television in order to view them.

Auto Tuning will completely re-tune the television and can

be used to update the channel list. It is recommended that

Auto Tuning is run periodically to ensure that all new services

are added. All current channels and settings, i.e. locked

channels, will be lost.

•

Select the

SETUP from the main menu by using Up or Down

buttons. Press OK and Setup menu will be displayed.

00_MB45_[GB]_3910UK_IDTV_NICKEL9_19740W_(IB_INTERNET)_10068435.indd 10

•

Select the

Installation from the Setup menu by using Up

or Down buttons. Press OK and Installation menu will be

displayed.

•

Select

Automatic Channel Scan from the Installation menu

by using Up or Down buttons and press OK. A screen

will appear warning that previous digital programmes

and settings will be deleted. Select Yes and press OK to

continue with the Auto tuning.

•

The television will start to search for all available stations.

You must allow the television to complete the search. When

the search is complete the Auto tuning screen will display

the total number of services found.

•

After search is completed for digital channels, a message

asking whether to search for analogue channels appears

on the screen:

•

Press the

OK button to search for analogue channels.

The following menu appears on the screen for analogue

channel search:

English - 10 -

17.05.2010 16:43:23