Toshiba 19DV500B Kullanıcı El Kitabı - Sayfa 10

TV Toshiba 19DV500B için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba 19DV500B 45 sayfaları.

A wide variety of external equipment can be connected via the sockets located on the side of the television. Whilst all the

necessary adjustments and controls for the television are made using the remote control, the buttons on the right side of

Switching on

If the standby LED is unlit, check that the mains plug is

connected to the power and then the LED lights up white.

Press the

button on the right side of the television to

switch the television on.

To put the television into Standby, press

control. To view the television, press

may take a few seconds to appear.

Note:

The active Standby LED may appear for a few moments when

the TV is switched off.

A beeping sound will be heard when the buttons are pressed.

This is normal operation, not a fault.

For energy saving:

Turning the television off at its mains supply, or un-plugging it, will cut

energy use to nearly zero for all televisions. This is recommended when the

television is not being used for a long time, e.g. when on holiday.

Reducing the brightness of the screen will reduce energy use. Energy

efﬁ ciency cuts energy consumption and thus saves money by reducing

electricity bills.

NOTE: Putting the television into standby mode, will reduce energy

consumption, but will still draw some power.

Please always refer to the owner's manual of the equipment

to be connected for full details.

NOTE: The USB socket has limited functionality, and Toshiba

can take no responsibility for damage to other connected

equipment.

00_MB45_[GB]_(01-TV)_1900UK_IDTV_NICKEL9_22740W_DVD_(IB_INTERNET)_10070651.indd 9

Controlling the TV

the television may be used for some functions.

Press the MENU button on the remote control to see the

menus.

In analogue TV mode the menu appears as a group of

icons each for a menu option. Press the Left or Right button

to select a topic.

on the remote

In digital TV mode the menu appears as a list. Press the Up

again. The picture

or Down button to select a topic.

To use the options press the Up and Down buttons on the

remote control to move up and down through them and OK,

Left or Right buttons to select the required choice. Follow

the on screen instructions. The functions of each menu are

described in detail throughout the manual.

Using the Controls and Connections on the TV

•

Press "

a volume level scale (slider) will be displayed on the

screen.

•

Main menu OSD cannot be displayed via control buttons.

"+/-" buttons will function as volume up/down as default.

Even if you set other functions for these buttons, "+/-"

buttons will perform as default after a short while.

•

Press

select the next or previous programme.

•

Hold the "

•

Use "

English - 9 -

Using the Remote Control

+/-" buttons to increase or decrease volume, so

P/V/AV button once and then use "+/-" buttons to

P/V/AV" button, source OSD will be displayed.

+/-" buttons to select the desired source.

30.11.2010 02:16:39