Toshiba 20V300H Kullanıcı El Kitabı - Sayfa 13

TV Toshiba 20V300H için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba 20V300H 28 sayfaları. Lcd color tv

Sayfayı Yazdır

Turning the TV on

Switching on the TV

Connect the power cord to the TV and a wall

outlet.

Press f/I on the right side of TV or f on the

remote control.

The f/I Power indicator lights in green.

Note:

If you watch black and white programs when the

color system mode is set to Auto, color noise

may appear on the screen. In this case select the

appropriate Color system (For the system

of each country or region, refer to pages 14 and

26).

Switching the TV to standby mode

Press f on the remote control or f/I on the TV

side panel to switch to the standby mode.

The f/I Power indicator lights up in red.

Notes:

• This TV is not fully disconnected from the main

supply, as minute current is consumed even

when f/I is in standby mode. When the TV will

not be used for a long period of time, such as

during vacation or travel, remove the power

plug from the wall outlet.

• The TV will automatically turn itself off after

approximately 15 minutes if it is tuned to a

vacant channel or a station that completes its

broadcast for the day. This function does not

work in external input or Blue screen Off mode.

• If power is cut off while you are viewing the TV,

the Last Mode Memory function turns on the

TV automatically when power is applied again.

If power is going to be off for a long time and

you are going to be away from your TV, unplug

the power cord to prevent the TV from turning

on in your absence.

Watching TV programs

Selecting the menu language

Choose from 5 different languages (English,

Chinese (CS), Malay, Thai or Vietnamese) for the

on-screen display.

Press MENU, then press 1 or 2 to display

SET UP menu.

Getting started

Press t or s to select Language.

Press 1 or 2 to select the desired language.

Changing the program position

Enter the desired program position number

using the Number buttons on the remote

control.

For program positions below 10, use 0

and the required number e.g., for program

position 1, press "0" and then "1".

You can also change the program position by

using P s or P t.

The program position will be displayed on

the screen with the Mono/Stereo/Dual audio

status.

Note:

The program position selection change between

different format channels takes several seconds.

Switching between two program positions

You can switch two program positions without

entering actual position number each time.

Select the ﬁ rst program position you want to

view.

Select the second program position with the

Number buttons (0-9).

Press

displayed.

Each time you press

and forth between the two program positions.

Displaying the on-screen information

Press CALL to display the following on-

screen information.

The information will disappear in 6 seconds.

• Program position or external input mode

selected

• Mono/Stereo/Dual audio status

To erase the display instantly, press CALL

again.

SET UP

Language

English

Auto tuning

Manual tuning

Picture position

EXIT

Back

Watch TV

. The previous channel will be

, the TV will switch back