Toshiba 22BL704B Kullanıcı El Kitabı - Sayfa 15

TV Toshiba 22BL704B için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba 22BL704B 48 sayfaları. Digital series

Connecting External Equipment

Before connecting any external equipment, remove the mains plug from the wall socket.

Aerial cable:...........................................................

Connect the aerial to the ANT. socket on the rear of the TV.

SCART lead:..........................................................

If you use a decoder* or a media recorder, it is essential

that the scart cable is connected to the TV.

Before running ﬁ rst time installation, any connected devices

need to be set to standby mode.

The DIGITAL AUDIO socket enables the connection of a

suitable surround sound system.

HDMI

(High-Deﬁ nition Multimedia Interface) is for using

with a DVD decoder or other equipment with digital audio and

video output. It is designed for best performance with 1080i

and 1080p high-deﬁ nition video signals but will also accept

and display VGA, 480i, 480p, 576i, 576p and 720p signals.

PC format signals will also be displayed.

NOTE: Although this TV is able to connect to HDMI equipment,

it is possible that some equipment may not operate correctly.

22BL702B_22BL704B_MB62_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10076309_10077187.indd 14

You can use YPbPr to VGA cable (not supplied) to enable

YPbPr signal via VGA input.

WARNING: You cannot use VGA and YPbPr at the same

time.

You can use Side AV connectors to connect a camcorder

etc. to your TV.

A wide variety of external equipment can be connected to the

TV; therefore, the relevant owner's manuals for all additional

equipment must be referred to for exact instructions.

If the TV automatically switches over to monitor external

equipment, return to normal TV by pressing the desired pro-

gramme position button. To recall external equipment, press

SOURCE button repeatedly to switch between sources.

Regardless of source's property, audio output from the DIGI-

TAL AUDIO socket cannot be copied.

- 14 -

18.05.2012 09:16:15