Toshiba 24 W38 Series Kullanım Talimatları Kılavuzu - Sayfa 40
TV Toshiba 24 W38 Series için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Toshiba 24 W38 Series 45 sayfaları.
Ayrıca Toshiba 24 W38 Series için: Hızlı Başlangıç Kılavuzu (9 sayfalar), Kullanım Talimatları Kılavuzu (37 sayfalar), Kullanım Talimatları Kılavuzu (38 sayfalar), Kullanım Talimatları Kılavuzu (37 sayfalar), Kullanım Talimatları Kılavuzu (37 sayfalar)
Sayfayı Yazdır
If you carried out the setup after the first time instal-
lation you will return to the first screen of the setup
wizard when you press OK. In that case press Exit
or highlight Setup Later and press OK in order to
exit the setup.
Once the setup is complete, you will be able to control
the functions of your TV with Alexa.
Note: Make sure that the devices are connected to the internet.
Interacting with Alexa
To activate Alexa and make it listen what you are
saying, just say "Alexa". You can also press and
hold the Language button on the remote for about 3
seconds to do that. When Alexa is activated its logo
will appear on the lower right corner of the TV screen.
You can press the Exit button on your TV remote to
end the Alexa's response to your request.
Press and hold the Mute button on the remote for
about 3 seconds to turn off the microphones. Press
and hold the button again to turn on the microphones.
Standby Mode LED Status
The embedded microphone will affect the Standby
Mode Led status of your TV as follows:
Microphone
TV Power State
State
Off/Standby
Off
Mode
On
On
On
Off
Off/Standby
On
Mode
Example Commands
Here are some voice commands that you can use to
control the functions of your TV with Alexa:
Command
Alexa, turn on 'FN'
Alexa, turn off 'FN'
Alexa, play 'FN'
Alexa, pause 'FN'
Alexa, resume 'FN'
Alexa, stop 'FN'
Alexa, fast forward on 'FN'
Alexa, rewind on 'FN'
Alexa, set the volume of
'FN' to 50
Alexa, turn the volume up
on 'FN'
Alexa, turn the volume
down on 'FN'
Standby Mode
LED Status
Not lit
Green
Red
Red
Function
Powers on the TV
Powers off the TV
Starts media playback
Pauses media playback
Resumes media playback
Stops media playback
Advances media in fast
forward mode
Rewinds media
Sets the volume to the
specified level
Increases volume by 10
units
Decreases volume by
10 units
English - 39 -
Command
Alexa, mute 'FN'
Alexa, unmute 'FN'
Alexa, change the input to
"input_name" on 'FN'
Alexa, change channel to
"channel_number" on 'FN'
Alexa, change channel to
"channel_name" on 'FN'
Alexa, channel up on 'FN'
Alexa, channel down
on 'FN'
Alexa, next channel on
'FN'
FN is the abbreviation for 'Friendly Name'.
DVD Mode (**)
Safety Information
CAUTION
DVD Player is a class 1 laser product. However this
product uses a visible laser beam which could cause
hazardous radiation exposure. Be sure to operate the
player correctly as instructed.
CLASS 1
LASER PRODUCT
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock of persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Notes on Discs
On handling discs
• To keep the disc clean, handle the disc by its edge.
Do not touch the surface.
• Do not stick paper or tape on the disc.
Function
Mutes sound
Unmutes sound
The TV switches to the
input source with the spec-
ified name (e.g., HDMI 1)
The TV switches to the
channel with the specified
number (e.g., channel
200)
The TV switches to the
channel with the specified
name
The TV switches to the
next higher channel, if any
available
The TV switches to the
next lower channel, if any
available
The TV switches to the
next channel on the
channel list
(**) Limited Models Only