Toshiba 24AF41 Kullanıcı El Kitabı - Sayfa 14
TV Toshiba 24AF41 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba 24AF41 32 sayfaları. Service manual
Ayrıca Toshiba 24AF41 için: Servis Kılavuzu (38 sayfalar)
Sayfayı Yazdır
Adding channels to the TV's memory
Your TV will stop on specific channels that are stored in the TV's
channel memory when you press Channel + or –. Use the steps below
to set all active channels in your area automatically.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory, you
can erase channels or add your favorite channels.
To add channels:
1. Press MENU, then press
2. Press
or
selection is highlighted.
3. Press
or
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press
to select CH PROGRAM.
5. Press
or
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW PLEASE WAIT" appears and count up
the received channel.
6. When channel programming is complete, the message "COMPLETED
(channel or cable number)" appears.
7. Press Channel
Adding and erasing channels manually
After you've programmed the channels, you can add or erase specific
channels.
To add or erase channels:
1. Select the channel you want to add or erase using Channel + or –.
If adding channels, you must select the channel to add by using the
Channel Number buttons.
2. Press MENU, then press
to display the SET UP menu.
3. Press
or
ERASE.
4. Press
or
ERASE, whichever function you
want to perform.
5. Repeat steps 1-4 for other
channels you want to add or erase.
Changing channels
To change the channel, you can:
• change the programmed channels using the remote control
• select a channel directly using the remote control
• scan the channels using the TV buttons
To change to the next programmed channel:
Press Channel + or – on the TV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100).
For example, to select channel 125, press the 100 button, the 2
button, and the 5 button.
3I70401D P12-21
12
or
to display the SET UP menu.
until the TV/CABLE
to highlight either
PICTURE AUDIO
TV / CABLE
CH PROGRAM
ADD / ERASE
SELECT
to start channel programming. The TV will automati-
or
to view the programmed channels.
or
PICTURE AUDIO
to highlight ADD/
TV / CABLE
CH PROGRAM
to select ADD or
ADD / ERASE
SELECT
POWER
1
CH
4
SET UP
OPTION
TV CABLE
7
START
ADD
VOL
–
ADJUST
EXIT
RECALL TV/VIDEO
RESET CAP/TEXT
CODE
POWER
1
4
7
CH
VOL
–
SET UP
OPTION
TV
START
ADD ERASE
EXIT
RECALL TV/VIDEO
ADJUST
RESET CAP/TEXT
CODE
12
16/08/2001, 15:55
TV
VCR
CABLE
CH RTN
ENT
2
3
100
5
6
8
9
0
CH +
Channel +/–
VOL
+
MENU/
ENTER
Menu
CH –
FAV
Exit
1/2
FAV
MTS
SLEEP
MUTE
TV
VCR
CABLE
CH RTN
2
3
ENT
Channel
5
6
100
Numbers
0
8
9
CH +
Channel +/–
VOL
+
MENU/
ENTER
Menu
CH –
FAV
Exit
1/2
FAV
MTS
SLEEP
MUTE