MSI 612BF Manuel - Sayfa 33

Anakart MSI 612BF için çevrimiçi göz atın veya pdf Manuel indirin. MSI 612BF 45 sayfaları. 3d-agp vga / 3d-audio m/b for socket 370
Ayrıca MSI 612BF için: Kullanıcı Kılavuzu (48 sayfalar)

83MHz/off , 95MHz/off , 100MHz/off , 100MHz/on , 112MHz/off , 117MHz/on , 124MHz/off,
133MHz/off , 133MHz/on.
CPU Ratio:
This item allows you to select the CPU ratio.
From X3 to X8

3-9 Defaults Menu

Selecting "Defaults" from the main menu shows you two options which are described below
Load Optimal Defaults:
When you press <Enter> on this item you get a confirmation dialog box with a message
similar to:
Load Optimal Defaults (Y/N) ? N
Pressing 'Y' loads the BIOS default values for the most stable, normal-performance system
operations.
Load Standard Defaults:
When you press <Enter> on this item you get a confirmation dialog box with a message
similar to:
Load Standard Defaults (Y/N) ? N
Pressing 'Y' loads the default values that are factory settings for optimal performance
system operations.

3-10 Supervisor/User Password Setting

You can set either supervisor or user password, or both of then. The differences
between are:
supervisor password : can enter and change the options of the setup menus.
user password
ENTER PASSWORD:
Type the password, up to eight characters in length, and press <Enter>. The password typed
now will clear any previously entered password from CMOS memory. You will be asked to
confirm the password. Type the password again and press <Enter>. You may also press
<Esc> to abort the selection and not enter a password.
To disable a password, just press <Enter> when you are prompted to enter the password. A
message will confirm the password will be disabled. Once the password is disabled, the
system will boot and you can enter Setup freely.
PASSWORD DISABLED.
: just can only enter but do not have the right to change
the options of the setup menus. When you select this
function, the following message will appear at the
center of the screen to assist you in creating a
password.
32