MSI 612BF Manuel - Sayfa 7
Anakart MSI 612BF için çevrimiçi göz atın veya pdf Manuel indirin. MSI 612BF 45 sayfaları. 3d-agp vga / 3d-audio m/b for socket 370
Ayrıca MSI 612BF için: Kullanıcı Kılavuzu (48 sayfalar)
3. Install DRAM Modules
4. Install Expansion card
5. Connect Cables, Wires, and Power Supply
2-5 Jumper Settings
CPU Bus Frequency Selection : JP1
1.
※
Users also can setting the CPU Bus frequency and CPU ratio in the "Frequency / Voltage
Control "of BIOS SETUP.
Table for the Socket370 Cpu
CPU Type
Celeron-300/300A
Celeron-333
Celeron-366
Celeron-400
Celeron-433
Celeron-466
※
Before install CPU please check the CPU Sepecification , and setting the correct CPU Bus
Frequency (Front Side Bus) and ratio in the "CHIPSET FEATURES SETUP" of BIOS
SETUP.
2. CMOS RAM Clear: JP13 (Yellow color selector)
WARNING: Make sure your computer is POWER OFF when you CLEAR CMOS.
Connect a jumper Cap over this jumper for a few seconds, will clears information stored in
the CMOS RAM Chip that input by user, such as hard disk information and passwords.
After CLEAR CMOS, you must enter the BIOS setup (by holding down <DEL> during
power-up) to re-enter BIOS information (see BIOS SETUP).
Selections
Normal
Clear CMOS
JP13
1-2 Default for R.T.C.
2-3 Reset R.T.C.
CPU Clock
Ratio
66 MHz
4.5X
66 MHz
5.0X
66 MHz
5.5X
66 MHz
6.0X
66 MHz
6.5X
66 MHz
7.0X
6
CPU Frequency
300 MHz
333 MHz
366 MHz
400 MHz
433 MHz
466 MHz