Epson Stylus Pro 10000 Series Kullanıcı Kılavuzu - Sayfa 4

Yazılım Epson Stylus Pro 10000 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson Stylus Pro 10000 Series 13 sayfaları. Auto take-up reel unit
Ayrıca Epson Stylus Pro 10000 Series için: Teknik Özellikler (6 sayfalar), Ürün Bilgileri (16 sayfalar), Kurulum Kılavuzu (26 sayfalar), Hızlı Kurulum Kılavuzu (34 sayfalar), Hızlı Referans Kılavuzu (12 sayfalar), Garanti (28 sayfalar), Hızlı Referans Kılavuzu (12 sayfalar), Teknik Özellikler (4 sayfalar), Teknik Özellikler (1 sayfalar), Montaj Kılavuzu (12 sayfalar)

Checking the Package Contents

Make sure that all the items shown below are

included and not damaged. Remove all protective

materials packed with this unit before you set it

up and turn on the power. Save all packaging and

protective materials in case you need to transport

the printer later.

Drive unit (with control box)

Take-up reel core (3 inch)

Sensor unit

Cable clamps

Movable unit stopper

Downloaded from:

http://www.usersmanualguide.com/

Movable unit

Screws (Large 2, small 4)

Drafting tape

Cable connector

Installing the Auto Take-Up Reel

Unit

Caution:

Use only the provided screws when installing

the auto take-up reel unit. Use of non-issue

screws can leave components insecurely

fastened, increasing the risk of injury and

printer damage.

Before starting:

❏ Make sure that the printer is turned off.

❏ Remove the paper basket or push the front

part of the paper basket to the rear to keep it

out of the way.