Toshiba DIGITAL Series Kullanıcı Kılavuzu - Sayfa 15

Hepsi Bir Arada Yazıcı Toshiba DIGITAL Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Toshiba DIGITAL Series 45 sayfaları. Split type
Ayrıca Toshiba DIGITAL Series için: Kullanıcı El Kitabı (48 sayfalar), Kullanıcı Kılavuzu (49 sayfalar), Kullanıcı El Kitabı (50 sayfalar), Kullanıcı Kılavuzu (48 sayfalar), Kullanıcı El Kitabı (4 sayfalar), Kullanıcı El Kitabı (41 sayfalar), Kullanıcı El Kitabı (22 sayfalar), Kurulum Notları (4 sayfalar)

Toshiba DIGITAL Series Kullanıcı Kılavuzu
Connecting an HDMI® or DVI Device to the HDMI Input
The HDMI input on your television receives digital audio and
uncompressed digital video from an HDMI source device
or uncompressed digital video from a DVI (Digital Visual
Interface) source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant [1] consumer electronic
devices (such as a set-top box or DVD player with HDMI or
DVI output).
NOTE:
• Some early HDMI equipment may not work properly with
your latest HDMI TV.
• Supported Audio format: Linear PCM, sampling rate
32/44.1/48kHz.

To Connect an HDMI Device

Connect an HDMI cable (type A connector) to the HDMI ter-
minal. For proper operation, it is recommended that you use
an HDMI cable with the HDMI Logo (
• If your HDMI connection is capable of 1080p and/or
your television is capable of refresh rates greater than 50Hz,
you will need a Category 2 cable. Conventional HDMI/DVI
cable may not work properly with this mode.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
• To view the HDMI device video, press the SOURCE button
to select HDMI1 or HDMI2.
32&40BV801B_MB38_[GB]_(IB_INTERNET)_DVB-T2_(3910UK)_10073217_10073218.indd 15
32&40BV801B_MB38_[GB]_(IB_INTERNET)_DVB-T2_(3910UK)_10073217_10073218.indd 15

To Connect a DVI Device

Connect an HDMI-to-DVI adaptor cable (HDMI type A
connector) to the HDMI terminal and audio cables to the
Component Audio Input sockets' RED and WHITE inputs
(see illustration).
• The recommended HDMI-to-DVI adaptor cable length is
6.6 ft (2m).
An HDMI-to-DVI adaptor cable transfers video only.
Separate analogue audio cables are required.
).
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
• When turning on your electronic components, turn on the
television fi rst, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device fi rst, and then the television.
English - 15 -
03.10.2011 18:52:54
03.10.2011 18:52:54