Direct
Point to point display also known as 1:1 Pixel Mapping in HDMI
source.
NOTE
• Using the special functions to change the size of the displayed
image(e.g. changing the height/width ratio) for the purposr of public
display or commercial gain may infringe on copyright laws.
• If the aspect ratio of the selected format is different from the one
of the TV transmission or video programme, it can cause a differ-
ence in vision.
• When using PC connected via HDMI terminal, the moving image
quality may be deteriorated.
Configuring advanced picture settings
˃ Picture
You can select the Picture Mode that provides the best viewing
experience.
Contrast
Adjust the Contrast level to increase or decrease how bright images
appear.
Brightness
Adjust the Brightness level to generate lighter or darker images.
Saturation
Ajust the colour intensity of the picture for a more vibrant image.
Tint
Adjust the colours from a green to magenta tint to view the natural
skin tones of people on the screen.
Sharpness
Adjust how sharp or soft edges of images appear.
Colour Temperature
Adjust how cool(blue), standard or warm(red) the white areas of an
image appears.
Noise Reduction
Improve how clear the picture appears by reducing noise.
Aspect Ratio
To choose the screen aspect ratio from 4:3, Wide, Zoom, Cinema, 1:1
PIXEL MAP,Full and Direct.
NOTE
The Aspect Ratio option is different in different inputs.
PC
Allow users to adjust the best display function.Such as Auto Adjust,
H Position, V Position, Clock, Phase.
NOTE
PC options are displayed on menu picture pages when your PC/
Notebook is connected to TV with VGA cable.
Sound
Adjusting the Sound Quality
Adjust current sound mode to apply to all sources or just current
source.
General Operation
Choosing a sound mode
You can select a favourite sound mode suitable for the content type
or the listening environment.
You can adjust the equalizer at specific frequency points(Such as
120Hz,500Hz,1.5KHz,5KHz,10KHz) when users switch to personal
mode.
Standard mode, the TV delivers a flat frequency response, which
preserves the natural characteristics of the original sound
In Music mode low and high frequencies are emphasized to en-
hance musical instrument reproduction.
Best suited for the content is moive.
Best suited for the content is sports.
Users can set their preferences.sound model.
Configuring advanced sound settings
MENU ˃ Sound
You can personalize the sound quality by adjusting the following set-
tings.
Adjust the left and right speaker strength to optimize audio for a
specific location.
The feature is select Audio Enhancements Mode: on or off.
On or Off can be selected. If On is selected, the option keeps the
audio in a preset range to eliminate large in volume.
Select digital audio output format: PCM, Auto or Off.
Channel
Automatically scan for channels to view programming from your TV
source.
TV should support Manual Scan. User can input the channel num-
ber that he want to search.
• Sound System:To set the sound system of current channel.
There are five modes to be chosen in all including L,MN,B/G, I, D/K.
• Colour System:To set the colour system of current
channel. There are three modes to be chosen in all including
NTSC,PAL,SECAM.
• Current Program:To set the current channel No. .
• Search:Start searching Channel.
• Fine-Tune:Under poor reception conditions, or when receiving
analogue signals from distant TV stations, the picture or sound
quality might be improved by using the Fine Tune option.
13
˃ Sound > Sound Mode
Standard
Music
Moive
Sports
Personal
Balance
Audio Enhancements
Auto Volume
Digital Audio Output
> Channel
Auto Tuning
Manual Tuning
Sayfayı Yazdır