Toshiba E-studio 2051c Güvenlik Bilgileri Kılavuzu - Sayfa 20

Hepsi Bir Arada Yazıcı Toshiba E-studio 2051c için çevrimiçi göz atın veya pdf Güvenlik Bilgileri Kılavuzu indirin. Toshiba E-studio 2051c 32 sayfaları. Multifunctional digital color systems

Toshiba E-studio 2051c Güvenlik Bilgileri Kılavuzu
1.GENERAL PRECAUTIONS
 Plug the power cord securely into the outlet. If it is not plugged in properly, it could heat up and cause a
fire or give you an electric shock.
 Do not damage, break or attempt to repair the power cord.
The following things should not be done to the power cord.
- Twisting it
- Bending it
- Pulling it
- Placing anything on it
- Heating
- Situating it near radiators or other heat sources
This could cause a fire or give you an electric shock. If the power cord is damaged, contact your service
representative.
 Do not install the equipment by yourself or try to move it once it has been installed. This could result in
an injury or damage to the device. Contact your service representative if the equipment needs to be
installed or moved.
 The socket outlet shall be near the equipment and be easily accessible.
 Pull out the plug from the outlet more than once a year to clean around the prongs. Accumulating dust
and dirt could cause a fire due to the heat released by electric leakage.
 When removing the plug from the outlet, do not pull the power cord. Always hold the plug when
removing it from the outlet. If the power cord is pulled, the wires may break and this could cause a fire or
give you an electric shock.
 Make sure that the ventilation holes are not blocked.
If the temperature within the Multifunctional Digital Systems becomes too high, a fire could result.
e-STUDIO2050C/2550C, e-STUDIO2051C/2551C, e-STUDIO2555C/3055C/3555C/4555C/5055C and
e-STUDIO2555CSE/3055CSE/3555CSE/4555CSE/5055CSE
 Both the Paper Feed Pedestal and the Large Capacity Feeder have 4 adjusters (antiskid devices)
underneath. After the equipment has been moved and installed, be sure to turn and lower them to fix it.
For the Paper Feed Pedestal, fix the fall-prevention stoppers after the adjusters have been adjusted.
Paper Feed Pedestal
18
General Precautions