Epson Stylus pro 3800 portrait edition Manuel - Sayfa 3

Yazılım Epson Stylus pro 3800 portrait edition için çevrimiçi göz atın veya pdf Manuel indirin. Epson Stylus pro 3800 portrait edition 3 sayfaları. Fill, refill or use refillable cartridges
Ayrıca Epson Stylus pro 3800 portrait edition için: Manuel (49 sayfalar), Kullanıcı Kılavuzu (19 sayfalar), Başlarken (13 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar), Buradan Başlayın Kılavuzu (6 sayfalar), Sınırlı Garanti (12 sayfalar), Kurulum Kılavuzu (4 sayfalar), Uyarı (1 sayfalar), Broşür (6 sayfalar), Teknik Özellikler (12 sayfalar), Buradan başlayın (2 sayfalar)

REFILLING CARTS WITH INK

Ink level shown on the printer's LCD panel and the Epson Status Monitor will NOT be accurate with these refillable carts,

so ink level must be monitored visually. The cartridge chips automatically reset themselves frequently, so ink levels will always

read full or almost full.

Refill cartridges before ink level reaches 1/2" from the bottom for proper ink flow and to avoid running a cartridge empty. As long

as the circle and rectangle chambers indicated above are at least 1/2 filled with ink, the cartridge does not need to be re-primed. If

the chambers are low or empty, the cartridge must be re-primed to refill the exit channel with ink.

To refill cartridges- place cartridge fill hole up, then remove the fill hole plug and inject ink using the syringe with blunt tip needle

attached. Do NOT overfill cartridges. You MUST allow for a small air gap at the top for proper function. Always shake ink bottles

before filling or refilling cartridges to ensure pigment is in suspension. For consistent output, always confirm that the ink bottle

and cartridge color position match before filling or refilling.

6/26/12