Epson Stylus Pro 4880 Portrait Edition Şartname Sayfası - Sayfa 4

Yazılım Epson Stylus Pro 4880 Portrait Edition için çevrimiçi göz atın veya pdf Şartname Sayfası indirin. Epson Stylus Pro 4880 Portrait Edition 6 sayfaları. Warranty statement
Ayrıca Epson Stylus Pro 4880 Portrait Edition için: Broşür (1 sayfalar), Broşür ve Teknik Özellikler (6 sayfalar), Kurulum Kılavuzu (16 sayfalar), Hızlı Referans Kılavuzu (12 sayfalar), Ağ Kılavuzu (46 sayfalar), Kurulum Kılavuzu (4 sayfalar), Ürün Bilgi Kılavuzu (16 sayfalar), Sınırlı Garanti (12 sayfalar)

Sayfayı Yazdır

Epson Stylus Pro 4880 Portrait Edition Şartname Sayfası

Windows

Make sure your computer and printer are turned on but the printer is NOT CONNECTED

to your computer.

If you see a Found New Hardware Wizard screen, click Cancel and disconnect the

Note:

USB cable.

Insert the Epson Stylus Pro 4880 printer CD.

With Windows Vista, if you see the AutoPlay window, click Run Epsetup.exe. When you see

Note:

the User Account Control screen, click Continue.

Click Install.

If you see message asking if you want to install

Note:

or run various installation programs, select Continue,

Continue Anyway, or Install this driver software

anyway.

When you see a window asking you

to connect the printer, connect the

USB cable.

With Windows XP, if you see a

Note:

Found New Hardware Wizard screen

after you connect the printer, select No,

not this time and click Next. Then click

Next again.

If installation doesn't continue

Note:

after a moment, make sure you securely

connected and turned on the printer.

Follow the on-screen instructions

to install all the necessary software

and manuals, and place a link to the

Epson Professional Imaging Website on your desktop.

When you're done, click Exit and remove the CD.

Load Roll Paper

Slide the black paper stop off the end of the spindle.

If the paper has a 2-inch core, remove the adapters by pressing the four tabs.

Make sure your hands are clean, and avoid touching the printable

Note:

surface of the paper. Try to handle paper by the edges. Make sure you don't rub

or scratch the coating or dent the edges of the paper.

Position the roll so the paper unwinds as shown, then slide

it onto the spindle.

Slide the black paper stop back onto the spindle. Insert it firmly into

the end of the roll.

Open the roll paper cover.

Place the paper and spindle in the printer as shown,

with the black end on the left.

Roll paper cover

Tab

Paper source button