Epson Stylus Pro 7600 Ambalajdan Çıkarma ve Kurulum Kılavuzu - Sayfa 14
Yazılım Epson Stylus Pro 7600 için çevrimiçi göz atın veya pdf Ambalajdan Çıkarma ve Kurulum Kılavuzu indirin. Epson Stylus Pro 7600 24 sayfaları. W 24-inch-wide and 44-inch-wide photographic
printers with new seven-color ultrachrome ink system
Ayrıca Epson Stylus Pro 7600 için: Manuel (5 sayfalar), Hızlı Referans Kılavuzu (11 sayfalar)
Sayfayı Yazdır
2. Mount the printer on the printer mount as
shown.
3. Fasten the bottom of the printer and the
printer mount with wing screws (N) and
washers (O).
O
N
4. This completes the mounting procedure.
Make sure the printer and the Stand are
fastened together securely.
When you feed the roll paper forward, extend the
two paper guides out from the lower printer
before printing.
Attaching the paper basket
1. Insert the basket hooks into the slots on the
rotary boards attached to the bottom
horizontal strut. The top ends of the basket
hooks should be facing downward.
12
2. Snap the rear paper basket joints onto the tips
of the basket hooks at the rear of the Stand.
Make sure the joints are positioned as shown.
O
3. Rotate the front paper basket joints to enfold
N
the bar which is not attached to the fabric as
shown (P). Then, snap the front paper basket
joints onto the tips of the basket hooks at the
front of the Stand. Make sure the joints are
positioned as shown (Q).
P
Q