Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst Ambalajdan Çıkarma ve Kurulum Talimatları - Sayfa 13

Yazılım Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst için çevrimiçi göz atın veya pdf Ambalajdan Çıkarma ve Kurulum Talimatları indirin. Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst 28 sayfaları. Warranty statement
Ayrıca Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst için: Broşür (1 sayfalar), Teknik Özellikler (2 sayfalar), Başlarken (13 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar), Ağ Kılavuzu (46 sayfalar), Manuel (12 sayfalar), Sınırlı Garanti (12 sayfalar)

Sayfayı Yazdır
Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst Ambalajdan Çıkarma ve Kurulum Talimatları
Unpacking and Assembling
EPSON Stylus Pro

7880/7880C/7450

Choosing a Place for the Printer
❏ Leave adequate room for easy operation,
maintenance, and ventilation as shown below.
(Values in the illustration below are the
minimum.)
❏ Leave at least 20 cm between the back of the
printer and the wall.
❏ Place the printer on a desk. If you cannot place
the printer on a desk, you will need the Stand.
If you place your printer on a desk, follow the
guidelines listed below.
❏ Choose a desk that can hold the printer
weight (about 49 kg) and has a height of
600-800 mm from the floor.
❏ Make sure the surface is flat and stable.
❏ Place the front rubber legs of the printer
just at the end of the desk.
❏ Leave enough room (over 600 mm) in
front of the desk.
❏ Prevent your printouts from getting dirty
or crinkled.
❏ Use a grounded power outlet. Do not use a
damaged or frayed power cord. Avoid using
an outlet that is shared with other appliances.
❏ Use only an outlet that meets the power
requirements of this printer.
❏ Operate the printer under the following
conditions:
Temperature: 10 to 35°C
Humidity:
20 to 80% without condensation
❏ Avoid locations that are subject to direct
sunlight, excessive heat, moisture, or dust.
❏ Do not block the ventilation openings.
❏ Avoid locations near potential sources of
interference such as loud speakers or cordless
phones.
❏ Avoid locations near TVs, radios, air
conditioners, or humidifiers.
❏ Avoid locations that are subject to shocks or
vibrations.
❏ Keep the printer away from combustible
substances.
❏ Keep the printer away from dusty areas.
Deciding Where to Unpack the Printer
Before unpacking, read the followings:
❏ Setup and assemble the printer near to the
chosen place of use, as moving the printer may
result in damage.
❏ Allow floor space of 2.5 × 2.5 m approx., and
height of at least two times that of the larger
box containing the printer unit.
11