Philips WT121XES Kullanıcı Kılavuzu - Sayfa 33
Monitör Philips WT121XES için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Philips WT121XES 36 sayfaları. Applied rfid
Sayfayı Yazdır15.0.0 ACCESSORY (Optional)
15.1.0
Docking Station WD121 series
15.1.1
Product configurations:
WD121
• Docking Station (see Fig. 1-2)
WD121P-M
• Docking Station (see Fig. 1-2)
• AC Power Adapter (Medical grade)
• Power Cord set (EU, UK and US cords)
15.1.2
Hardware Installation
To use the Docking Station, connect it to power through its AC adapter.
The ProScribe can be docked and undocked both in OFF and ON status.
To dock the ProScribe, keep it in vertical position and align the PHILIPS logos in such a way the one on the ProScribe is
aligned around 1 cm on the left of the Docking Station one.
Gently release the ProScribe in the Docking Station; 2 plastic frames will drive the ProScribe in the correct position.
When the ProScribe is docked, the green led on the front of the Docking Station will light on.
The ProScribe front led will turn to yellow, indicating the battery is charging; when full charge is reached, the led will
turn to green.
15.1.3
Software Installation
The ProScribe (Xpe version), comes with the Docking Station driver devices (10/100 Ethernet RJ45 port and USB 2.0
ports) already installed; the relevant drivers will be activated when you dock the ProScribe and deactivated when you
undock it.
Docking Station (Front view)
USB
Docking LED
WT11
USB
Fig. 33a
Docking Station with ProScribe
WD121P
• Docking Station (see Fig. 1-2)
• AC Power Adapter (ITE grade)
• Power Cord set (EU, UK and US cords)
WD1212
• 2 x Docking Station (see Fig. 1-2)
Docking Station (Back view)
connector PAD
ProScribe
Docking Station
adapter connector
USB
RJ-45
Network connector
Fig. 33b
Fig. 33c
AC/DC