Philips X Series Kullanıcı Kılavuzu - Sayfa 22

Monitör Philips X Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Philips X Series 50 sayfaları. Video wall display
Ayrıca Philips X Series için: Ambalajdan Çıkarma ve Kurulum Kılavuzu (8 sayfalar), Kullanıcı Kılavuzu (49 sayfalar)

Philips X Series Kullanıcı Kılavuzu
55BDL3207X

3.3.2. ID Remote Control

Set remote control ID number when using several displays.
Press [ID] button. The red LED blinks twice.
1. Press [ID SET] button for more than 1 second to enter the
ID Mode. The red LED lights up.
Press the [ID SET] button again to exit from ID mode. The
red LED lights off.
Press the digit numbers [0] ~ [9] to select the display you
want to control.
For example: press [0] and [1] for display No.1, press [1] and [1]
for display No.11.
The numbers available are from [01] ~ [255].
2. Not pressing any button within 10 seconds will exit the ID
Mode.
3. If a wrong button is pressed, wait 1 second after the red
LED lights off and then lights up again, then press the
correct digits again.
4. Press [ENTER] button to confirm. The red LED blinks twice
and then lights off.
NOTE:
Press [NORMAL] button. The green LED blinks twice,
indicating the display is in normal operation.
It is necessary to set up the ID number for each display
before selecting its ID number.
Use " " (pause) key on the remote control to freeze
the screen. Use " " (play) key on the remote control to
unfreeze the screen.
The "freeze" feature only can be adopted on "real" video
sources like VGA, HDMI, DVI, DP.
Any operation on the remote control or video mode
change will unfreeze the screen.
20