Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst Ambalajdan Çıkarma ve Kurulum Talimatları - Sayfa 11

Yazılım Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst için çevrimiçi göz atın veya pdf Ambalajdan Çıkarma ve Kurulum Talimatları indirin. Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst 28 sayfaları. Warranty statement
Ayrıca Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst için: Broşür (1 sayfalar), Başlarken (13 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar), Ağ Kılavuzu (46 sayfalar), Manuel (12 sayfalar), Sınırlı Garanti (12 sayfalar)

Sayfayı Yazdır

Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst Ambalajdan Çıkarma ve Kurulum Talimatları

1. Setting up the Printer

4. Rotate the rear paper basket joints to enfold

the bar that is not attached to the fabric. Insert

the stanchion pins into the holes on the base

upright left and right, as shown.

5. Slide out the upper basket hooks to their full

length.

6. Hook both ends of the center shaft (O) on the

upper basket hooks.

7. Insert the lower shafts into the holes on the

bottom of the base unit as shown below.

8. Stand the lower shafts.

9. As shown in the figure, hook the paper feed

support film on the shaft of the paper basket

(the movable hook (a) on the intermediate

shaft and the stability hook (b) on the back

shaft), so that it hangs along the inner surface

of the basket.