Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C Manuel - Sayfa 28
Stereo sistemi Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C için çevrimiçi göz atın veya pdf Manuel indirin. Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C 31 sayfaları. 3 cd changer with dolby® pro logic processor, five loudspeakers, 320 watts total power
Ayrıca Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C için: Kullanıcı Kılavuzu (31 sayfalar), Teknik Özellikler (2 sayfalar)
Sayfayı Yazdır
All manuals and user guides at all-guides.com
TIMER
5 Press CLOCK/TIMER to store the start
time.
™ The timer is now set.
™ The
remains on the display.
TIMER
• At the preset time, the timer will be
activated.
™ The selected source will be played.
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
– If the source selected is TUNER, the last
tuned frequency will be switched on.
– If the source selected is CD, playback
will begin with the first track of the
selected disc or program. If the CD trays
are empty, TUNER will be selected
instead.
– If the source selected is TAPE, and if the
preset time is reached during high
speed dubbing, the TUNER will be
selected instead.
– The timer will not activate if a recording
is in progress.
28
pg 01-31/P88/22-Eng
28
To switch off the TIMER
• Press TIMER ON/OFF on the remote
control.
™ The timer is now switched off.
™ The display will show "CANCEL"
and the
disappears.
TIMER
To start the TIMER again (for the same
preset time and source)
• Press TIMER ON/OFF on the remote
control.
™ The timer is now on.
™ The
appears on the display.
TIMER
SLEEP TIMER
Sleep
(only on remote control)
This feature allows you to select a length
of time after which the system will switch
to the standby mode automatically.
1 Press SLEEP on the remote control
repeatedly to select a period of time.
™ The selections are as follows (time in
minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF
™ 60 ...
™ "SLEEP XX" or "OFF" will be
displayed. "XX" is the time in
minutes.
2 When you reach the desired length of
time, stop pressing the SLEEP button.
™ After this amount of time passes, the
system will switch to the standby
mode.
To switch off the Sleep Timer
• Press SLEEP repeatedly until "OFF" is
displayed, or press the STANDBY ON
button.
3/6/00, 1:28 PM
3139 116 19721