Philips 3 DISC SHELF SYSTEM ESTIMATE FWC71C37 Kullanıcı El Kitabı - Sayfa 13

Stereo sistemi Philips 3 DISC SHELF SYSTEM ESTIMATE FWC71C37 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Philips 3 DISC SHELF SYSTEM ESTIMATE FWC71C37 29 sayfaları. 3 cd changer with 120 watts total power logic deck and variable incredible surround
Ayrıca Philips 3 DISC SHELF SYSTEM ESTIMATE FWC71C37 için: Teknik Özellikler (2 sayfalar)

Sayfayı Yazdır

– Even though the AC power cord is

removed from and reconnected to the

wall socket, the demonstration will

remain off until it is switched on again.

To start the demonstration mode

• Press and hold Ç(on the system

only) for five seconds when the

system is in standby mode.

™ The demonstration will begin.

Easy Set

EASY SET allows you to store all

available radio stations automatically.

• Press and hold STANDBY ON (on

the system only) for five seconds

when the system is in standby or

demonstration mode.

™ "EASY SET" will be displayed,

and followed by "TUNER" and

then "AUTO".

™ EASY SET will start searching for

all radio stations on FM band and

then followed by radio stations on

AM band.

™ All available radio stations with

sufficient signal strength will be

stored. Up to 40 presets may be

stored.

Notes:

– EASY SET will start with the FM band,

if there are still presets available, the

system will continue to store the AM

band.

pg 01-27/C71-C72/37-Eng

OPERATING THE SYSTEM

– When EASY SET is used, all previously

stored radio stations will be replaced.

– The last preset radio station will

appear on the display when EASY SET

is completed.

Switching the system ON

• Press CD, TUNER, TAPE or AUX.

You can also switch on the system by

pressing any one of the CD DIRECT

PLAY buttons.

Switching the system to

standby mode

• Press STANDBY ON or B on

the remote control.

™ The system will switch to standby

mode.

™ (for model FW-C72 only)

About five seconds later, the

system will go into an energy

saving mode if the demonstration

mode has been disabled.

Selecting the Source

• Press the respective source selection

button: CD, TUNER, TAPE or

AUX.

™ The display indicates the selected

source.

Note:

– For an external source, make sure you

have connected the audio left and right

OUT terminals of the external

equipment (TV, VCR, Laser Disc player,

DVD player or CD Recorder) to the

AUX/CDR IN terminals.

Selecting the Equalizer

Display

You can select the desired equalizer

display for the system. You must not

press the DSC or INCREDIBLE

SURROUND (for model FW-C71 only)

button on the system before using the

JOG control.

• Adjust the JOG control to select the

desired Equalizer Display, NORMAL,

TOP DOWN, or NITE MODE.

™ The selected display will be

shown.

12/16/99, 1:20 PM

NORMAL Display

PROGRAM

SHUFFLE

STEREO

BACK

REPEAT

TIMER

REC

FRONT

HSD

NEWS

T.A.

60Hz

250Hz

500Hz

1KHz

2KHz

4KHz

8KHz

TOP DOWN Display

PROGRAM

SHUFFLE

STEREO

REPEAT

TIMER

REC

BACK

NEWS

T.A.

FRONT

HSD

60Hz

8KHz

250Hz

500Hz

1KHz

2KHz

4KHz

NITE MODE Display

PROGRAM

SHUFFLE

STEREO

REPEAT

TIMER

REC

BACK

FRONT

HSD

NEWS

T.A.

60Hz

250Hz

500Hz

4KHz

8KHz

1KHz

2KHz

Note:

– In NITE MODE, all lights will be

switched off and the display brightness

will be dimmed.

3139 116 19521 (ENG)