Philips 3 DISC SHELF SYSTEM W-10W FWC1C37 Kullanıcı Kılavuzu - Sayfa 16
Stereo sistemi Philips 3 DISC SHELF SYSTEM W-10W FWC1C37 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Philips 3 DISC SHELF SYSTEM W-10W FWC1C37 28 sayfaları. Philips home stereo system user's manual
Sayfayı Yazdır
16
Shuffle
(only on remote control)
In shuffle mode, the system plays all the
available discs and their tracks in
random order. Shuffle may be used also
when tracks are programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE.
™ "SHUFFLE" will be displayed.
™ The SHUF flag, the disc and the
track selected at random appear
on the display.
• The discs and the tracks will be
played in random order until you
pressÇ.
• If you press REPEAT during
shuffling, the current track or all
available discs will be played
repeatedly.
™ "TRACK" or "ALL DISC" will be
displayed.
™ The REP and SHUF flags appear
on the display.
2 Press SHUFFLE again to resume
normal playback.
™ The SHUF flag disappears from
the display.
Note:
– REPEAT DISC mode will be cancelled
when shuffle is selected.
pg 01-28/C1-C10/37-En
CD
Repeat
(only on remote control)
You can play the current track, a disc or
all available discs repeatedly.
1 Press REPEAT on the remote
control to select the various repeat
modes.
™ "TRACK", "DISC", "ALL DISC"
or "OFF" will be displayed.
™ The REP flag appears on the
display.
• The selected track, selected disc or
all available discs will now be played
repeatedly until you pressÇ.
2 Press REPEAT until the "OFF"
mode is displayed to resume normal
playback.
™ The REP flag disappears from the
display.
Notes:
– REPEAT DISC mode is not available
during program play or shuffle mode.
– You can also repeat shuffling a
program.
™ "TRACK" or "PROGRAM " will be
displayed.
™ The REP, PROG, and SHUF flags
appear on the display.
16
TUNER
C10
FW-
MINI HIFI SYSTEM
STANDBY-ON
C D 1 • 2 • 3
FM
•
AM
CD
TUNER
TUNING
SEARCH
STOP• CLEAR
PLAY• PAUSE PREV
DIGITAL
DSC
SOUND
CONTROL
PROGRAM
CLOCK•TIMER
DIGITAL SOUND CONTROL
Note:
– For 'EASY SET' feature, please refer to
page 12.
Tuning to radio stations
1 Press TUNER (FM•AM) to select
TUNER mode.
™ "TUNER" will be displayed.
A few seconds later, the current
radio frequency will be displayed.
2 Press TUNER (FM•AM) again to
select the desired waveband : FM or
AM.
3 Press à or á for more than one
second, then release.
™ The display will show "SEARCH"
until a radio station with sufficient
signal strength is found.
16/11/1999, 1:56 PM
TAPE 1 • 2
VIDEO
MASTER
VOLUME
TAPE
AUX
PRESET
NEXT
DIM
• Repeat this procedure until the
desired station is reached.
• To tune to a weak station, briefly
press à or á repeatedly until the
display shows the desired frequency
and/or when the best reception has
been obtained.
3139 116 19292 (ENG)