Epson Stylus Scan 2000 Manuel - Sayfa 13

Yazılım Epson Stylus Scan 2000 için çevrimiçi göz atın veya pdf Manuel indirin. Epson Stylus Scan 2000 35 sayfaları. Scanning application force quits on mac os 10.4 release of twain pro driver 2.10a;
Ayrıca Epson Stylus Scan 2000 için: Kullanıcı Kılavuzu (7 sayfalar), Ürün Bilgi Formu (4 sayfalar), Hızlı Başlangıç (4 sayfalar), Ürün Bilgi Kılavuzu (13 sayfalar), Ürün Bilgi Formu (4 sayfalar), Ürün Destek Bülteni (12 sayfalar), Şartname (2 sayfalar), Manuel (11 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (14 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Çevrimiçi Kılavuz (10 sayfalar)

11. In the following window, move the slider to the right or left until the two shades

of gray horizontal stripes match.

Note:

The gray stripes will not perfectly blend together; however, try to make the two

tones match as closely as possible.

12. Click OK to register the calibration setting.

13. When the EPSON Stylus Scan Drivers installation is complete, installation for

other applications begins automatically. Follow the on-screen instructions.

14. After all applications have been installed, a message appears asking you to restart

your computer. Click OK.

15. Restart the computer, then turn on the Stylus Scan by pressing its

Note:

Do not change the printer name (leave it as Stylus Scan 2000), otherwise your Stylus

Scan does not work correctly.

For Windows 98 with a USB connection

Before connecting the Stylus Scan to your Windows 98 computer using the USB port,

you must first install the Stylus Scan software. This section guides you through the

software installation and also includes instructions on connecting to your computer

using the USB port. Follow the steps below.

Note:

The USB connection cannot be used with Windows 95.

Turn on the computer and start Windows 98.

Setting Up Your Stylus Scan 2000

power button.