MSI 3DA0 Manuel - Sayfa 31

Monitör MSI 3DA0 için çevrimiçi göz atın veya pdf Manuel indirin. MSI 3DA0 31 sayfaları.

Sayfayı Yazdır

Troubleshooting

The power LED is off.

■

Press the monitor power button again�

■

Check if the monitor power cable is properly connected�

No image.

■

Check if the computer graphics card is properly installed�

■

Check if the computer and monitor are connected to electrical outlets and

are turned on�

■

Check if the monitor signal cable is properly connected�

■

The computer may be in Standby mode� Press any key to activate the

monitor�

The screen image is not properly sized or centered.

Refer to Preset Display Modes to set the computer to a setting suitable for the

monitor to display�

No Plug & Play.

■

Check if the monitor power cable is properly connected�

■

Check if the monitor signal cable is properly connected�

■

Check if the computer and graphics card are Plug & Play compatible�

The icons, font or screen are fuzzy, blurry or have color problems.

■

Avoid using any video extension cables�

■

Adjust brightness and contrast�

■

Adjust RGB color or tune color temperature�

■

Check if the monitor signal cable is properly connected�

■

Check for bent pins on the signal cable connector�

The monitor starts flickering or shows waves.

■

Change the refresh rate to match the capabilities of your monitor�

■

Update your graphics card drivers�

■

Keep the monitor away from electrical devices that may cause

electromagnetic interference (EMI)�

Appendix

A-5