Epson StylusRIP Hızlı Kurulum Kılavuzu - Sayfa 2

Yazılım Epson StylusRIP için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Epson StylusRIP 4 sayfaları.

Installing StylusRIP

Before you install the StylusRIP software, make sure you set up

your printer correctly and install the standard EPSON driver,

following the instructions that came with the printer. Try

printing from WordPad or Notepad to make sure everything

works correctly.

Then follow these steps:

1. Insert the StylusRIP diskette and CD-ROM in the

appropriate drives.

2. Run the

Setup.exe

3. Install the Adobe PostScript printer driver located on the

CD-ROM.

Run the

Setup.exe

on the CD-ROM. Follow the instructions on the screen to

install the driver. Make sure you choose

port and set the PostScript driver as your default printer

driver. When the program asks if you want to print a test

page, make sure you choose

4. Make sure your printer is turned on and connected to your

LPT1 port.

5. Run the

Update.exe

6. When the update is complete, turn off your printer.

Remove the CD-ROM and diskette from your computer.

7. Attach the PostScript logo sticker to the top of your

printer.

8. Turn your printer back on. It is now licensed and enabled

as a PostScript printer.

program located on the diskette.

program in the

\Drivers\USA

program on the diskette.

folder

as the printer

FILE