Philips AZ102C Kullanıcı Kılavuzu - Sayfa 7

Stereo sistemi Philips AZ102C için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Philips AZ102C 15 sayfaları. Cd soundmachine
Ayrıca Philips AZ102C için: Teknik Özellikler (2 sayfalar), Kullanıcı Kılavuzu (14 sayfalar), Teknik Özellikler (2 sayfalar), Kullanıcı Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Kullanıcı Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Teknik Özellikler (2 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), Servis Kılavuzu (11 sayfalar)

Sayfayı Yazdır
Philips AZ102C Kullanıcı Kılavuzu
Tuner
General operation
Switching on and off and selecting the
function
1 To select your sound source, adjust the
Source selector to: CD, FM or MW.
2 To switch off the set, adjust the Source
selector to OFF position.
3 To switch to LINE IN mode, connect an
external audio source to the LINE-IN inlet.
Helpful hints:
•
The set switches to LINE IN mode
automatically when an external audio source
is connected, no matter the set is in CD, FM
or MW mode.
The LINE-IN inlet is not for earphones.
•
Adjusting volume and sound
Adjust the sound with the VOLUME and
DBB controls.

Radio reception

1 Adjust the Source selector to FM or
MW.
2 Turn TUNING to tune to a station.
Helpful hints:
To improve radio reception
•
For FM, extend, incline and turn the
telescopic antenna for best reception. Reduce
its length if the signal is too strong.
•
For MW, the set uses a built-in antenna.
Direct this antenna for best reception by
turning the whole set.

Playing a CD

•
This CD player plays Audio Discs including
CD-Recordables (CD-R) and CD-Rewritables
(CD-RW).
•
MP3, CD-ROM, CD-I, CDV,VCD, DVD or
computer CDs are not possible for playback.
IMPORTANT!
CDs encoded with copyright protection
technologies by some record companies may
be unplayable by this product.
1 Adjust the Source selector to CD.
2 Open the CD door, and insert a CD with
the printed side facing up, then press the
CD door gently to close.
➜ Display shows --, and later the total
number of tracks. (See 3)
3 Press 2; to start playback.
4 To pause playback, press 2;.
➜ Display: 2 flashes. (See 4)
5 To resume, press 2; again.
6 To stop CD playback, press 9.
Helpful hints:
CD play will also stop when:
–
you open the CD door;
–
you select FM, MW or OFF sound source;
–
the CD has reached the end.
CD Player