Toshiba HD-A3KC Kullanıcı El Kitabı - Sayfa 16
DVD Oynatıcı Toshiba HD-A3KC için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba HD-A3KC 48 sayfaları. Hd dvd player
Preparation (continued)
Step 2: Connecting to audio system
Sound can output from connected audio system.
If you made the HDMI connection between the player and a TV, this step is unnecessary. Skip to Step 3.
Via HDMI output
You can enjoy the benefi ts of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI OUTPUT jack of your player
to an AV receiver with an HDMI audio input.
This connection requires selection of "Digital Out HDMI" (Step 16,
(not supplied)
To HDMI OUTPUT
Via optical digital audio output
You can listen to down-converted Dolby Digital Plus and Dolby TrueHD as well as Dolby Digital and DTS using a receiver
with Dolby Digital and DTS decoding capabilities and an optical digital input.
This connection requires selection of "Digital Out SPDIF" (Step 16,
Optical digital cable (not supplied)
To DIGITAL AUDIO OUTPUT
BITSTREAM/PCM OPTICAL
Via analog audio output
Sound is output only in 2ch format.
Audio cable (not supplied)
To ANALOG
AUDIO OUTPUT
16
_ H D - A 3 K U _ E n g . i n d d 1 6
HDMI cable
HDMI cable
(not supplied)
HDMI INPUT
HDMI OUTPUT
AV amplifier
DIGITAL INPUT
OPTICAL
TV
ANALOG AUDIO
INPUT
AV amplifier
page 21).
Caution
• When you are connecting (via the HDMI
OUTPUT jack) an AV decoder that does not have
Dolby Digital or DTS decoding capability, be sure
to set "Digital Out HDMI" (
or "Downmixed PCM". Otherwise, high volume
HDMI INPUT
sound may damage your hearing as well as the
speakers.
Note
• You may need to adjust the HDMI audio output
to match the capabilities of your AV amplifi er. In
HDMI compatible
this case, set "Digital Out HDMI" (
device
"PCM".
page 21).
*To use the optical digital output, use an
optical cable to connect this jack to an optical
audio input on a device capable of processing
Dolby Digital, DTS bitstream, or PCM audio.
AV amplifier
page 21) to "PCM"
page 21) to
7 . 8 . 2
4 : 4 :
P M