Philips BM50 Kullanıcı Kılavuzu - Sayfa 19
Stereo sistemi Philips BM50 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Philips BM50 28 sayfaları.
Ayrıca Philips BM50 için: Kullanıcı Kılavuzu (28 sayfalar)
Sayfayı Yazdır
6 Other features
Set the alarm timer
This unit can be used as an alarm clock. You
can select DISC, USB, or TUNER as the alarm
source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER for 3 seconds.
2
Press
/
repeatedly to select an
alarm source (DISC, USB,or TUNER)
3
Press SLEEP/TIMER to confirm.
» The hour digits begin to blink.
4
Repeat steps 2-3 to set the hour, minute,
and adjust volume of the alarm.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press SLEEP/TIMER repeatedly to view
•
the alarm information and activate or
deactivate the alarm.
» If the timer is activated,
[TIMER](Timer) is displayed.
» If the timer is deactivated, [TIMER
OFF] (timer off) is displayed and
[TIMER](Timer) disappears.
Tip
•
If no DISC or USB is detected, the system will use FM
as the default alarm source.
Set the sleep timer
Press SLEEP/TIMER to set the number of
•
minutes before the unit automatically turns
off:
[SLP 120]
•
•
[SLP 90]
[SLP 60]
•
[SLP 45]
•
[SLP 30]
•
[SLP 15]
•
•
[SLP OFF]
Tip
•
Sleep timer can only be set when the unit is 'On'.
Listen from an external device
You can listen to an external device through this
unit with an audio cable.
1
Press FM/AUDIO IN repeatedly to select
the AUDIO IN source.
2
Connect an audio cable (not supplied)
between:
the AUDIO IN socket (3.5 mm) on
•
the unit;
•
and the headphone/LINE OUT socket
on an external device.
3
Start to play music on the connected
device (see the device user manual).
EN
17