Philips BTB2465 Kullanıcı Kılavuzu - Sayfa 10
Stereo sistemi Philips BTB2465 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Philips BTB2465 26 sayfaları.
Ayrıca Philips BTB2465 için: Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
2
Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
Set clock
1
In standby mode, press and hold CLOCK
on the remote control for 3 seconds.
» The [24H] or [12H] hour format is
displayed.
2
to select the [24H] or
Press
/
[12H] hour format.
3
Press CLOCK to confirm.
» The hour digits are displayed and begin
to blink.
4
Press
/
to select hour and press
CLOCKto confirm.
» The minute digits are displayed and
begin to blink.
5
Press
/
to select minute and press
CLOCK to confirm.
» [SYNC ON] is displayed on the LCD
screen.
6
Press
/
to select [SYNC ON] or
[SYNC OFF].
If [SYNC ON] is selected, [DAB] or [RDS]
•
is displayed. Press
option, then press CLOCK to confirm.
If [SYNC OFF] is selected, the system
•
will not synchronize clock with RDS radio
station or DAB stations that transmit
signals.
8
EN
/
to select one
Note
•
If no button is pressed in 10 seconds, the system exits
clock setting mode automatically.
Tip
•
You can press CLOCK to view clock information in
power-on mode.
Turn on
•
Press .
» The unit switches to the last selected
source.
Switch to standby mode
•
Press
again to switch the unit to standby
mode.
» The clock (if set) is displayed on the
panel.
Switch to ECO standby mode:
•
Press and hold
» The display panel is dimmed.
Note
•
The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
for more than 3 seconds.