MSI Optix G241 Manuel - Sayfa 30

Monitör MSI Optix G241 için çevrimiçi göz atın veya pdf Manuel indirin. MSI Optix G241 30 sayfaları.

Troubleshooting

The power LED is off.

■

No image�

■

The screen image is not properly sized or centered�

Refer to Preset Display Modes to set the computer to a setting suitable for the

monitor to display�

No Plug & Play�

■

A-4

■

The icons, font or screen are fuzzy, blurry or have color problems�

■

The monitor starts flickering or shows waves.

■

Downloaded from

ManualsNet.com

Press the monitor power button again�

Check if the monitor power cable is properly connected�

Check if the computer graphics card is properly installed�

Check if the computer and monitor are connected to electrical outlets and

are turned on�

Check if the monitor signal cable is properly connected�

The computer may be in Standby mode� Press any key to activate the

monitor�

Check if the monitor power cable is properly connected�

Check if the monitor signal cable is properly connected�

Check if the computer and graphics card are Plug & Play compatible�

Avoid using any video extension cables�

Adjust brightness and contrast�

Adjust RGB color or tune color temperature�

Check if the monitor signal cable is properly connected�

Check for bent pins on the signal cable connector�

Change the refresh rate to match the capabilities of your monitor�

Update your graphics card drivers�

Keep the monitor away from electrical devices that may cause

electromagnetic interference (EMI)�

search engine