Philips BTM177 Kullanıcı Kılavuzu - Sayfa 24

Stereo sistemi Philips BTM177 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Philips BTM177 29 sayfaları. Bluetooth wireless micro system
Ayrıca Philips BTM177 için: Teknik Özellikler (3 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar)

Sayfayı Yazdır
Philips BTM177 Kullanıcı Kılavuzu

Clock/Timer

Viewing clock

●
The clock (if it is set) is shown in normal standby
mode.
To view the clock in any sound source
(CD or FM for example )
●
Press briefly DISPLAY/CLOCK.

Setting the clock

1
In standby mode, press DISPLAY/CLOCK.
➜
12 hour or 24 hour mode is displayed.
2
Press ALBUM/PRESET +/- to select between
12 hour and 24 hour display.
3
Press DISPLAY/CLOCK again to confirm.
➜
The hour digits flash.
4
Press ALBUM/PRESET +/- to select the hour.
5
Press DISPLAY/CLOCK to confirm.
➜
The minutes digits flash.
6
Repeat steps 4-5 to set minute.

Setting the timer

●
The system can be used as an alarm clock,
whereby the CD or FM or USB is switched on at
a set time. The clock time needs to be set first
before the timer can be used.
1
In standby mode, press and hold SLEEP/
TIMER about 2 seconds on the remote control.
2
Press SOURCE (or CD/USB/FM on the
remote control) to select sound source.
3
Press SLEEP/TIMER to confirm your desired
mode.
➜
The hour digits flash.
4
Press ALBUM/PRESET +/- on the remote
control to set hour.
5
Press SLEEP/TIMER to confirm.
➜
The minutes digits flash.
6
Repeat steps 4-5 to set minute.
24
Notes:
– Timer is not available in Bluetooth or AUX
mode.
– If CD source is selected and no disc is in the CD
tray or the disc has an error, FM will be selected
automatically.
– If USB source is selected and no compatible
USB device is plugged, FM will be selected
automatically.
Activating and deactivating
TIMER
●
press SLEEP/TIMER repeatedly.
➜
Display shows
deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
●
Press SLEEP/TIMER on the remote control
repeatedly.
➜
Display shows
options in sequence: 90, 75, 60, 45, 30,15,
OFF... if you have selected a time.
●
To deactivate, press SLEEP/TIMER on the
remote control once or more until " 0FF" is
shown, or press STANDBY ON on the system
(or 2on the remote control).
➜
disappears from the display.
if activated, and disappears if
and one of the sleep time