Philips DCM2020 Kullanıcı Kılavuzu - Sayfa 17

Stereo sistemi Philips DCM2020 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Philips DCM2020 22 sayfaları. Micro music system
Ayrıca Philips DCM2020 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (23 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (22 sayfalar), Broşür (3 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Kullanıcı Talimatları (21 sayfalar), Kullanıcı Kılavuzu (23 sayfalar)

Sayfayı Yazdır
Philips DCM2020 Kullanıcı Kılavuzu

Show RDS information

Radio Data System (RDS) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1
Tune to an RDS station.
2
Press RDS repeatedly to scroll through the
following information (if available):
» Station name
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» RDS clock
» Frequency
Synchronize clock with RDS
You can synchronize time shown on the unit
with that on the RDS station.
1
Tune to an RDS radio station that
transmits time signals.
2
Press RDS for over 2 seconds.
» [CT SYNC] is displayed and the unit
reads RDS time automatically.
» If no time signal is received, [NO CT]
is displayed.
Note
•
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
EN
18
7 Other features
Set sleep timer
When the unit is turned on, press
SLEEP/TIMER repeatedly to select a time
period (in minutes).
» When sleep timer is activated,
displayed.
•
To deactivate sleep timer, press
SLEEP/TIMER again until
disappears.
Set alarm timer
This unit can be used as an alarm clock. You can
select CD, iPod/iPhone/iPad, playlist, FM, or USB
as alarm source.
Note
•
Make sure that you have set the time correctly.
1
In standby mode, press and hold SLEEP/
TIMER until [TIMER SET](timer set) scrolls
on the display.
» [SELECT SOURCE] (select source)
scrolls on the screen.
2
Press SOURCE repeatedly to select a
source: DISC, USB, TUNER, iPod/iPhone/
iPad or playlist.
•
If iPod/iPhone/iPad playlist is selected
as the alarm source, you need create
a playlist called "PHILIPS" in your
iPod/iPhone/iPad.
•
If no playlist called "PHILIPS" is created
in the iPod/iPhone/iPad or no track is
stored in the playlist, the unit switches
to TUNER alarm source.
3
Press SLEEP/TIMER to confirm.
» The hour digits are displayed and begin
to blink.
is