Philips DCM2020 Kullanıcı Kılavuzu - Sayfa 9

Stereo sistemi Philips DCM2020 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Philips DCM2020 21 sayfaları. Micro music system
Ayrıca Philips DCM2020 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (23 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (22 sayfalar), Kullanıcı Kılavuzu (22 sayfalar), Broşür (3 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Talimatları (21 sayfalar), Kullanıcı Kılavuzu (23 sayfalar)

Sayfayı Yazdır
Philips DCM2020 Kullanıcı Kılavuzu

3 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________

Connect speakers

Note
•
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
1
Insert the speaker wires completely into
the speaker input sockets on the back of
the unit.
EN
10

Connect power

Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•
Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•
Before you connect the AC power cord, ensure that
you have completed all other connections.
1
Connect the power cable to the wall
socket.

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine, or fire. Never discard batteries in fire.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.