Toshiba SD900KY Kullanıcı Kılavuzu - Sayfa 34

DVD Oynatıcı Toshiba SD900KY için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Toshiba SD900KY 40 sayfaları. Mini thermal printer

Sayfayı Yazdır
Function setup
Customizing the Function Settings (continued)
Setting details
JPEG Interval
1) Press SETUP button.
2) Press
/
button to select the Video.
3) Press
button, then the
Interval.
4) Press ENTER button, then the
change the JPEG Interval.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Off:
Plays back one file at a time.
5 seconds:
Plays back images in the form of a slide
show at 5 seconds interval.
10 seconds: Plays back images in the form of a slide
show at 10 seconds interval.
15 seconds: Plays back images in the form of a slide
show at 15 seconds interval.
Audio
Digital Output
Selects the output sound format corresponding to your
system connection.
1) Press SETUP button.
2) Press
/
button to select Audio.
3) Press
button, then use the
Digital Output.
4) Press ENTER button, then use the
the output sound format.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
34
/
button to select the JPEG
/
button to shift and
Aspect Ratio
: 16 : 9
: Auto Fit
TV System
: PAL
Video Out
: HDMI
Off
HDMI Resolution
5 seconds
HD JPEG Mode
10 seconds
JPEG Interval
15 seconds
: PCM
: Off
/
button to select
/
button to select
PCM: Select when connected to a Multi-channel digital
stereo amplifier. The DVD player outputs sound in the PCM
stereo format when you play a DVD recorded on the Dolby
Digital, MPEG1 or MPEG2 recording system.
Bitstream: Disc audio raw data will be output. Select
"Bitstream" if your amplifier supports "DTS".
Off: To disable Digital Output.
Notes
• When you make a connection to a TV, Dolby Surround
Pro Logic or stereo system via the analogue audio jacks,
select "PCM" or "Bitstream".
• If this DVD player is connected to a TV using HDMI,
make sure to select "PCM".
Night Mode
Night mode is equivalent to Dynamic Range Compress.
When it is On, it reduces the variations between loud and
soft sounds in audio output. You can still hear softer sounds
and dialog even in very low volume.
1) Press SETUP button.
2) Press
/
button to select Audio.
3) Press
button, then use the
Night Mode.
4) Press ENTER button, then use the
select the On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Note
Night mode is Dynamic Range Control (DRC) option for
analogue audio output.
Off
PCM
Bitstream
/
button to select
/
button to
: PCM
Off
On