Toshiba XDE600KE Kullanıcı El Kitabı - Sayfa 39

DVD Oynatıcı Toshiba XDE600KE için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba XDE600KE 40 sayfaları. 1080p up-scaling dvd player
Ayrıca Toshiba XDE600KE için: Kullanıcı El Kitabı (40 sayfalar)

Sayfayı Yazdır

Others

Downloaded From Disc-Player.com Toshiba Manuals

Before Calling Service Personnel

Check the following guide for the possible cause of a problem before contacting service.

Symptoms and correction

Symptom

Cause

No power.

• The power plug is disconnected.

The DVD player turned off

• The automatic power off function turned the

by itself.

unit off.

No picture or abnormal color

• The TV is not set to receive DVD signal

(pinkish, greenish, etc.).

output.

• The video/HDMI cable is not connected

securely.

• Mismatch setting between TV and this unit.

• Wrong connection.

• P-Scan mode is selected on a TV equipped

with component video input jacks but does not

support progressive scan.

No sound.

• The equipment connected with the audio cable

is not set to receive DVD signal output.

• The audio cable is not connected securely.

• The audio receiver or TV is turned off.

• The setting of output sound format is

incorrect.

The playback picture has oc-

• The disc is dirty.

casional distortion.

• It is in fast forward or fast reverse playback.

• The effect of copy protection.

Brightness is unstable or

noises are present in the

playback pictures.

The DVD player does not

• No disc is inserted.

start playback.

• An unplayable disc is inserted.

• The disc is placed upside down.

• The disc is not placed within the guide.

• The disc is dirty.

• The parental lock function is set.

Playback does not follow

• It is in the mode of repeat playback, memory

the course of the disc's

playback, etc.

program.

Buttons do not work.

• Power supply ﬂ uctuations or other abnormalities

such as static electricity may interrupt correct

operations.

The remote control does not

• The remote control is not pointed at the remote

work properly.

sensor of the DVD player.

• The remote control is too far from the DVD

player.

• The batteries in the remote control are

exhausted.

Correction

• Connect the power plug securely into the wall outlet.

• Press the PLAY button.

• Select the appropriate video input mode on the TV

so the picture from the DVD player appears on the

TV screen.

• Connect the video/HDMI cable securely into the

appropriate jacks.

• Select the correct Video out setting.

• Check the connection.

• To turn off progressive mode.

• Select the correct input mode of the audio receiver

so you can listen to the sound from the DVD player.

• Connect the audio cable securely into the

appropriate jacks.

• Turn on the equipment connected with the audio

cable.

• Select the proper audio setting.

• Remove the disc and clean it.

• Sometimes a small amount of picture distortion

may appear. This is not a malfunction.

• Connect the DVD player directly to the TV. Avoid

connecting the DVD player to a VCR or TV/VCR

combination.

• Insert a disc.

• Insert a playable disc. (Check the disc type and

color system.)

• Place the disc with the playback side down.

• Place the disc correctly inside the guide on the

disc tray.

• Clean the disc.

• Cancel the parental lock function or change the

parental lock level.

• These operations may prevent a proper progress

of the contents.

• Press and hold the ON/STANDBY button on the

front panel for more than about 3 seconds. The

DVD player turns off. Press the button again to turn

it on. If the buttons still do not work, disconnect

the power plug and insert it into the wall outlet

again.

• Point the remote control at the remote sensor of

the DVD player.

• Operate the remote control within about 7 m.

• Replace the batteries with new ones.

Page

11-13

11-16