Toshiba TDP-MT500 Kullanıcı El Kitabı - Sayfa 25

Projektör Toshiba TDP-MT500 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba TDP-MT500 42 sayfaları. Home projector
Ayrıca Toshiba TDP-MT500 için: Kullanıcı El Kitabı (40 sayfalar)

Sayfayı Yazdır
Toshiba TDP-MT500 Kullanıcı El Kitabı
C. Making projection
Preparations:
•
Remove the lens cap.
•
Turn on power for the connected video equipment.
Main power switch
Focus ring
Zoom ring
TELE
WIDE
MENU/EXIT
ENTER
POWER button /
POWER
LAMP
POWER indicator
TEMP
POWER ON/OFF
POWER button
C1
SOURCE button
COMP1
S
S-VIDEO
16:9
16:9
REAL
REAL
1
MENU
CNT
CONTRAST BRIGHT
TEM
GAM
GAMMA SHARPNESS
COLOR
TEMP
1 Turn "ON" the main power switch (Turn to
indication I).
•
When the main power switch is
turned on, POWER indicator comes
on in orange.
•
If the projector finished operation without sufficient cooling,
the following operation of the main power button may not work
during the time when the cooling fan is turning. (At this time
POWER indicator blinks in orange.) After the fan has stopped
turning, press the power button again to turn on the indicator
in orange.
MENU/EXIT
POWER
Power can not be
turned "ON" or "OFF".
2 Press POWER ( ) button.
•
It may take about one minute for the lamp to come on.
•
On rare occasions, the lamp may fail to come on. At this time, turn
on the lamp again after a few minutes.
3 Select an input signal.
SOURCE
•
Press one of SOURCE buttons (VIDEO, S-VIDEO, COMPONENT
DVI
C2
D
COMP2
DVI-D
DVI
1, COMPONENT 2, DVI-DIGITAL, or DVI-ANALOG button) ac-
V
A
VIDEO
DVI-A
4:3
ZM
cording to the connected input terminal.
4:3
ZOOM
DYN
DYNAMIC
ASPECT
•
Select the input signal after video image is projected on the screen.
2
3
•
With this projector, the input signal is selected from the input sig-
ENTER
nal sources contained in the signal setting menu. (See Page 26
EXIT
for the details.)
BRI
COL
TIN
•
Picture images of some input signals may not be projected on the
COLOR
TINT
SH
proper position of the screen. On this occasion, execute "AUTO"
LIGHT
LIGHT
in the signal setting menu of the setting menu. (See Page 30.)
4 Set the projector after adjusting the projec-
tion distance to obtain specified image frame
size.
5 Set the projector and screen so that they
may face perpendicular to each other. (See
Page 11.)
•
If the projector and the screen can not be made perpendicular to
each other, adjust the projection angle. (See Page 11.)
6. Adjust size of the projected image by turn-
ing the zoom ring.
•
It is possible to change image size by varying the distance from
the projector to the screen.
VIEWING COMPUTER IMAGES
ENTER
MENU/EXIT
Blinking in green
POWER
LAMP
TEMP
MENU/EXIT
ENTER
Lighting in orange
POWER
LAMP
TEMP
ENTER
Lighting in green
LAMP
TEMP
25