Toshiba TDP-MT700 Kullanıcı El Kitabı - Sayfa 14

Projektör Toshiba TDP-MT700 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba TDP-MT700 34 sayfaları. Home theater projector
Ayrıca Toshiba TDP-MT700 için: Kullanıcı El Kitabı (36 sayfalar), Servis Kılavuzu (49 sayfalar)

Sayfayı Yazdır

The remote control may fail to operate if the infrared remote sensor is exposed to bright

sunlight or fluorescent lighting.

In rare cases, ambient conditions could impede the operation of the remote control. If this

happens, point the remote control at the main unit again, and repeat the operation.

Due to some functions are not available for certain input signals, an icon

the screen when the button press is not effective.

PIP and POP buttons

To turn the PIP or POP function on or off, press the PIP or POP button. Adjust the size of the PIP

image by pressing the + or - button. If you want to switch between the two windows, toggle SWAP so

that you can adjust the image settings in the selected window.

FREEZE

Pauses the image.

10. LIGHT

Turns the remote control's backlight on.

Overview

ON/STANDBY

Press and hold this button to turn the projector on when it is in the

standby mode. Or press this button twice to turn the projector off.

INPUT buttons

Selects an input source to display on the projector.

SCREEN SIZE buttons

Selects the image aspect ratio to suit the input signal.

PICTURE MODE selection buttons

Restores settings saved in memory locations 1, 2, and 3 or restores

the default modes for the current input source, Dynamic, Standard,

Theater 1, or Theater 2.

Arrows ( / / / )

Used to select the desired menu or to make adjustments.

Opens the selected items of the menu.

Turns the on-screen display control menu on or off.

Picture quality adjustment buttons

p.23

p.26

p. 20

p. 24

p. 20

p.26

Enter button

p.26

p. 32

p.27

p.23

p.26

will appear on