Toshiba TDP-P8 Kullanıcı Kılavuzu - Sayfa 24
Projektör Toshiba TDP-P8 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Toshiba TDP-P8 42 sayfaları. User manual
Ayrıca Toshiba TDP-P8 için: Teknik Özellikler (2 sayfalar)
Installation (Continued)
• The fi rst time you use the projector after purchase, after the start-up screen, please press
"MENU" button.
Turning the power off
Press the ON/STANDBY button.
A message appears on the screen, confi rming that you wish to shut off the power. This
message will disappear after a moment. (This operation is no longer valid after the
message disappears.)
Press the ON/STANDBY button again.
If the screen turns off, but the internal cooling fan continues to operate for a short
while. Then, the projector goes into standby mode.
During cooling, the POWER indicator fl ashes. In this state, the power
A
cannot be turned back on.
If you are in a hurry, there is no problem with unplugging the power cord
or turning off the power consunption in this state.
In standby mode.
Note
• The projector consumes about 3-4W of power in standby. We recommend that you
unplug the power cord or turn off the main power switch if you will not be using the
projector for an extended period.
PRECAUTION
• If the power cord is unplugged before cooling is complete, give the lamp time (about 5
minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light.
When cooling lamp
A
After cooling complete
B
25