Toshiba TDP-T350 - XGA DLP Projector Kullanıcı El Kitabı - Sayfa 24
Projektör Toshiba TDP-T350 - XGA DLP Projector için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba TDP-T350 - XGA DLP Projector 31 sayfaları. Tdp-t250u user's guide
Sayfayı Yazdır
Using the menus (Continued)
■ The control setting menu
This menu sets items regarding wired LAN.
By this setting, you can transmit operation status messages from the projector to the
specified E-mail address.
Item
Wired LAN
[
: LAN setting]
Projector name: Enter a character string (0 to 64 characters)
using numeric keys of the remote control.
DHCP: Use
IP address: Enter a character string using numeric keys of the
remote control.
Subnet mask: Enter a character string using numeric keys of the
remote control.
Gateway: Enter a character string using numeric keys of the
remote control.
Confirm: [OK
[
: E-mail setting]
E-mail
Status alarm: On
SMTP server: Enter a character string using numeric keys of the
remote control.
Port No.: Enter a character string using numeric keys of the
remote control.
Destination address: Enter a character string using numeric
keys of the remote control.
Confirm: [OK
Detailed description
[Wired LAN]
Projects the image in colors more like projecting on a screen.
<Projector name>: Setting a projector name helps you identify each of the
projectors that are connected to the network.
• You cannot set a projector name starting with ERR.
<DHCP>: When <DHCP> is set to [Use], an IP address is automatically assigned
to the projector by a DHCP server. In case of a network that an IP address cannot
be assigned automatically, set <DHCP> to [Not use].
When <DHCP> is set to [Not use], ask your network administrator for IP address,
subnet mask, and gateway, then set the following items manually:.
<IP address>: This is a unique number assigned for a terminal to connect to a
network. The format is a quartet of 3-digit decimal number. (Example:
111.112.xxx.xxx)
Description
[
: Select item]
Not use
Cancel]
[
: Select item]
Off
Cancel]
46
<Subnet mask>: For dividing the network, the subnet mask determines the range
of an IP address assigned to a terminal. (Example: 255.255.xxx.xxx)
<Gateway>: Gateway specifies a network device like a router when accessing a
server outside the network. It is identified by an IP address. (Example:
111.112.xxx.xxx)
[E-mail]
<Status alarm>: Sends alarm information to the specified E-mail address when an
error such as lamp blowout occurs.
<SMTP server>: Set an IP address of the SMTP server.
<Port No.>: Enter a port number of the SMTP server.
<Destination address>: Enter within 60 characters. (Example: [email protected])
Character entry
Enter characters using numeric keys of the remote control.
The character is entered with a beep sound if the beep sound is set to [On].
Character entry mode
Remote
Items using characters, numbers, and symbols
control
(e.g., projector name and destination address)
button
"1" "."
"@"
"-"
"_"
"2" "A"
"B"
"C"
"a"
"b"
"3" "D"
"E"
"F"
"d"
"e"
"4" "G"
"H"
"I"
"g"
"h"
"5" "J"
"K"
"L"
"j"
"k"
"6" "M"
"N"
"O" "m"
"n"
"7" "P"
"Q"
"R"
"S"
"p"
"8" "T"
"U"
"V"
"t"
"u"
"9" "W" "X"
"Y"
"Z"
"w"
"0" "space!"#$%&'()*+,-./:;<=>?@[＼]^_`{｜}~"
Deletes one character.
Number only
"1"
"c"
"2"
"f"
"3"
"i"
"4"
"l"
"5"
"o"
"6"
"q"
"r"
"s"
"7"
"v"
"8"
"x"
"y"
"z"
"9"
"0"
Deletes one character.
47