Toshiba TDP-T45U - XGA DLP Projector Kullanıcı El Kitabı - Sayfa 9
Projektör Toshiba TDP-T45U - XGA DLP Projector için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba TDP-T45U - XGA DLP Projector 23 sayfaları. Toshiba tdp-t45u: specifications
Ayrıca Toshiba TDP-T45U - XGA DLP Projector için: Teknik Özellikler (2 sayfalar)
Sayfayı Yazdır
Names of each part on the control panel and remote control
Control panel
(9) (10) (11)
TEMP
LAMP
FAN
(1)
(8)
(2)
(5)
(3)
(7)
(11)
(4)
(6)
(5)
(13)
(14)
(6)
(4)
Name
: Main Function
(1) ENTER button
: Accepts the selected mode.
(2) MENU button
: Displays menus.
(3) SET UP button
: Sets up image and mode.
(4) ON/STANDBY button
: Turns the power on/off (standby).
(5) ON indicator
: Displays whether power is on or off.
(6) INPUT button
: Selects input.
(7) RETURN button
: Goes back one screen.
(8) Selection button
: Menu selections and adjustments,etc.
(9) LAMP indicator
: Displays lamp mode.
(10) TEMP indicator
: Lights when internal temperature too high.
(11) FAN indicator
: Displays cooling fan mode.
(12) Transmission indicator
: Lights when remote control transmitting.
(13) PJ MODE button
: Switches remote control mode.
(14)
button
: This control functions as a computer's [↓] button.
(15)
button
: This control functions as a computer's [↑] button.
(16) FREEZE button
: Pauses image.
(17) MUTE button
: Cuts off the picture and sound temporarily.
(18) L-CLICK button
: Left button click of remote control mouse.
Note
• For the remainder of this manual, buttons are referred to as follows:
Selection buttons ⇒
; ENTER button ⇒
Remote Control
Front
Rear
Remote control
transmitter
(8)
(18)
ENTER
R-CLICK
(15)
RETURN
ESC
(1)
(3)
SET UP
INPUT
MENU
(2)
(16)
Battery
cover
(17)
Control button
cover
p.30
p.27
p.23
p.23
p.25
p.31
p.24
p.38
p.38
p.19
p.29
p.29
p.20
16
Parts on the rear panel
(6)
MONITOR
COMPUTER 2 IN
(
Y/P
/P
B
(15)
Name
(1) Infrared remote sensor
(2) S-VIDEO terminal
(3) AUDIO (L/R) terminal
(4) CONTROL terminal
(5) AUDIO OUT terminal
(6) MONITOR terminal
(7) AC IN socket
(8) Main power switch
(9) Speaker
(10) Antitheft lock hole
(11) VIDEO terminal
(12) AUDIO (L/R) terminal
(13) COMPUTER 1 terminal
(14) AUDIO IN terminal
(15) COMPUTER 2 terminal
p.20
p.20
Note
• Although this owner's manual abbreviates component video signals as Y/P
product also supports signals from video equipment marked "Y/C
(5)
(4)
(3)
(2) (1)
CONTROL
S-VIDEO
AUDIO OUT
R
L
VIDEO
COMPUTER 1 IN
)
AUDIO IN
(
Y/P
/P
)
R
B
R
(14)
(13)
(12)
(11)
(10)
(9)
: Main Function
: Senses commands from the remote control.
: Input S video signals from video equipment.
: Input audio signals from video equipment.
: When operating the projector via a computer, connect
this to the controlling computer's RS-232C port.
: Outputs audio signals.
: Connect to a computer display, etc.
: Connect the supplied power cord here.
: AC power line ON (standby)/OFF.
: Outputs audio sound.
: Attach a safety cable or any other antitheft device.
: Input video signals from video equipment.
: Input audio signals from video equipment.
: Input RGB signal from a computer or other source, or a
component video signal (Y/P
equipment.
: Input audio signals from a computer or video
equipment with a component video signal output
terminal.
: Input RGB signal from a computer or other source, or a
component video signal (Y/P
equipment.
17
(7)
(8)
p.18
p.43
/P
) from video
B
R
/P
) from video
B
R
/P
, the
B
R
/C
."
B
R