Toshiba TDP-TW355 Kullanıcı El Kitabı - Sayfa 10

Projektör Toshiba TDP-TW355 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba TDP-TW355 47 sayfaları. Data projector
Ayrıca Toshiba TDP-TW355 için: Teknik Özellikler (2 sayfalar), Kullanıcı El Kitabı (48 sayfalar)

Sayfayı Yazdır
Toshiba TDP-TW355 Kullanıcı El Kitabı

Label locations

Caution – use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.

Parts on the rear panel

(1)
(2) (3)(4)
(5) (6) (8) (9)
(7)
(10)
(14)
(15)
(16) (17)
Do not carry the projector by having the slot cover part.
CAUTION
Doing so may cause that cover to come off, resulting in the projector
malfunction, injury or damage.
OR
Removing the slot
(11)
(12)
(13)
cover
Press on the circle ("O") while
sliding the cover in the
direction of the arrow. The
cover will come off.
18
Parts on the rear panel (Continued)
Name
: Main Function
(1) Infrared remote sensor
: Senses commands from the remote control.
(2) CONTROL terminal
LAN : Connects a network cable.
RS232C : When operating the projector via a computer, connect
this to the controlling computer's RS-232C port.
(3) COMPUTER (Y/P
/P
) 2 IN terminal
B
R
RGB : Input analog RGB signal from a computer or other
source, or a component video signal (Y/P
video equipment.
AUDIO : Input audio signals.
(4) COMPUTER (Y/P
/P
) 1 IN terminal
B
R
DVI-I : Input analog or digital RGB signal from a computer, or
a component video signal (Y/P
equipment.
AUDIO : Input audio signals.
(5) MONITOR terminal
: Connect to a computer display, etc.
(6) AUDIO OUT terminal
: Outputs audio signals.
(7) COMPUTER (Y/P
/P
) 3 IN terminal
B
R
BNC : Input G/B/R/HD/VD signal from a computer, or a
component video signal (Y/P
equipment.
AUDIO : Input audio signals.
(8) CARD indicator
: Displays PC card's status.
(9) UNMOUNT button
: Press before removing PC card.
(10) RESET switch (inside depression) : Press if CARD indicator turns red.
(11) Eject button
: Press to remove PC card.
(12) PC card slot
: Insert PC cards here.
(13) USB terminal
: Connects a commercial USB memory.
(14) CAMERA POWER terminal
: DC power supply terminal (+15 V). Reserved for future
use.
(15) VIDEO IN terminal
S-VIDEO : Input S video signals from video equipment.
AUDIO (L/R) : Input audio signals from video equipment.
VIDEO : Input video signals from video equipment.
AUDIO (L/R) : Input audio signals from video equipment.
(16) AC IN socket
: Connect the supplied power cord here.
(17) Main power switch
: AC power line ON (standby)/OFF.
p.20
p.91
/P
) from
B
R
/P
) from video
B
R
/P
) from video
B
R
p.49
p.49
p.49
p.49
p.49
p.50
19