Toshiba TDP-XP2 Kullanıcı El Kitabı - Sayfa 38

Projektör Toshiba TDP-XP2 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba TDP-XP2 48 sayfaları. Brochure
Ayrıca Toshiba TDP-XP2 için: Teknik Özellikler (2 sayfalar)

Sayfayı Yazdır

Lamp replacement (Continued)

Mount the new lamp.

Align the orientation, press down the new lamp

until the bottom is reached, and lock in place using

the two lamp locking screws.

Replace the lamp cover.

Align the cover, and press it in, then tighten the

screws loosened in step

is no longer loose. (Be sure to replace the lamp

cover.)

Reset the lamp time.

See the lamp's manual for instructions on resetting

the lamp time.

Notes and Precautions

• The [Lamp time] item in the Status display menu indicates the time of lamp use (as a

rough guide).

p.35

• It is recommended that the lamp be replaced after 3,000 hours of use.When [Lamp

time] reaches 3,000 hours, a message will appear. (After 3,000 hours, the message will

appear when the power is first turned on after each 100 hour period of use.) This display

disappears when you press the

• Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the

projector may fail to be powered on or the lamp may fail to come on.

• Always replace the lamp with a new one.

• The lamp is made out of glass. Do not touch the glass surface with your bare hands,

bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

Used Lamps

This projector's lamps contain trace amounts of environmentally harmful inorganic mer-

cury. Be careful not to break used lamps, and dispose of them in accordance with local

regulations.

until the lamp cover

button.