Toshiba TLP-ET1U Kullanıcı El Kitabı - Sayfa 23
Projektör Toshiba TLP-ET1U için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba TLP-ET1U 50 sayfaları. 3lcd projector
Item
Projection size
Keystone
Picture mode
Screen size
Up/down shift
Lamp power
Projection mode 1
Notes
• "Projection size" can also be adjusted by using
(See
p.24.)
• Decreasing the projection size may affect image quality slightly. (It does not change the menu size.)
• "Picture mode" can also be set via the PICTURE MODE button on the remote control or the "Picture adjust-
ment" menu. (See
p.27, 32.)
• "Screen size" can also be set via the SIZE button on the remote control or the "Default setting" menu. (See
p.25, 35.)
• "Keystone", "Up/down shift", "Lamp power", and "Projection mode 1" can also be adjusted via the "Default
setting" menu. (See
p.35.)
• The items set and adjusted on the "Easy setting" menu are saved when the power is turned off with the ON/
STANDBY button. They are not saved if power is disconnected by unplugging the power cord or by a power
failure.
G Correction of keystone distortion
When the tilt stand (see
(trapezoid) distortion.
The projector is capable of correcting this keystone distortion.
• Depending on the amount of keystone adjustment and the content of images, some information may be lost
or the picture quality may suffer. Keystone adjustment will not change the shape of the menus.
Change the picture area size on the screen.
Use
to decrease the projection size or
See
p.24 for details.
Correct the keystone (trapezoid) distortion of the screen. (For keystone
distortion, see "Correction of keystone distortion" described below.)
Use
to shrink the lower part or
Switch to the picture mode suitable for movie or game screens.
Press OK button first, and then set the item with
Standard/Cinema/Game
Switch the screen size.
Press OK button first, and then set the item with
Full/Theater wide/4:3/Zoom
See
p.25 for details.
Scroll the screen up or down, for example, when subtitles are outside the picture
area. (Adjustable only when the screen size is "Zoom".)
Down
Up
Lower lamp power to decrease the cooling fan noise.
Standard/Low
Setting lamp power "Low" makes the screen a little darker but makes the cooling fan
noise quieter.
Select whether the placement style is front or rear projection.
Front/Rear
( ) and
p.20) is used to change the projection angle, the picture will undergo keystone
Before correction
Description
to increase it.
to shrink the upper part.
and
buttons.
and
buttons.
( ) buttons, on the remote control or main unit.
After correction
23