Toshiba TLP-MT3 Kullanıcı El Kitabı - Sayfa 12

Projektör Toshiba TLP-MT3 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba TLP-MT3 43 sayfaları. Lcd projector
Ayrıca Toshiba TLP-MT3 için: Teknik Özellikler (2 sayfalar)

Sayfayı Yazdır

Before use

(Continued)

Installing batteries

1) Open the cover.

2) Install the batteries.

Make sure that the +/– polarities match the

illustration in the compartment.

3) Attach the cover.

Notes

Using batteries incorrectly can cause them to

leak or burst. Strictly observe the following.

• Install the batteries with their + and – ends

facing correctly.

• Do not charge, heat, disassemble, or short

the batteries or throw them into a fire.

• Do not leave exhausted batteries in the

remote control.

• Do not mix different types of batteries or new

and old batteries.

• When you will not be using the remote control

for a prolonged period, take the batteries out

of the remote control.

• When the remote control stops working or

only works from very close distance, replace

all the batteries with new ones.

• When replacing the batteries, use a more

longer life alkaline batteries.

• If a battery leaks, carefully wipe off any

residue inside the battery case before loading

new batteries.

Remote control operation

Point the remote control at the infrared

remote sensor and press a button.

Front side

Rear side

Distance : within about 5 meters from the front

of the remote sensor.

Angle :

within about 15 of the remote

sensor in every direction.

(Continued)