Toshiba TLP-S10 Servis Kılavuzu - Sayfa 20
Projektör Toshiba TLP-S10 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Toshiba TLP-S10 33 sayfaları. 1,200 ansi-lumens 2.1 kg eco mode
Ayrıca Toshiba TLP-S10 için: Kullanıcı El Kitabı (22 sayfalar), Kullanıcı El Kitabı (22 sayfalar), Teknik Özellikler (2 sayfalar)
Sayfayı Yazdır
Service Mode
How to sift to the Service mode
While the Audio level adjustment bar or the Camera gain adjustment bar is displayed on the screen, press
the buttons, [INPUT], [ON/STANDBY], [AOUT KEYSTONE] and [AUTO SET] simultaneously.
Then, the projector shifts to the Service mode.
The Service mode will be maintained until you pull the AC plug out.
How to display the Operation state
After the projector shifted to the Service mode, press [AUTO KEYSTONE] button and [VOL.+] button at
once.
Then, the Operation state appears on the screen.
When you press [MENU] button, it will disappear.
The adjustment values
of input signal level
that you are using.
The values of
setting keystone
correction
Times of error (0-255)
Service mode
Firmware version of the camera unit
( the model with a camera only)
L=
10: 30: 50
Sub-B =
109, 114, 124
KC0 =
T:39 P:10261 H:5055
KC2 =
T:41 P:10263 H:4160
Err =
9
List =
13, 1, 1, 2, 1, 1, ,13, 13, 10, 0
the latest error
C10 TLP-T71M
P=
10: 30: 50
Sub-C =
100, 110, 99
KC1 =
T:40 P:10264 H:5944
KC3 =
T:44 P:10306 H:5084
Shutdown =
7
the older error
Past ten times
Transmission speed
9600bps
Model name
1000-1000
T=
10: 30: 50
Times of shutdown
on the power-on
state
Firmware version
of the projector
Timer indicator
L: Lamp timer
P: Panel timer
T: Total timer