Epson V11H304020 - PowerLite 822+ XGA LCD Projector Kullanıcı Kılavuzu - Sayfa 8

Yazılım Epson V11H304020 - PowerLite 822+ XGA LCD Projector için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson V11H304020 - PowerLite 822+ XGA LCD Projector 42 sayfaları. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Ayrıca Epson V11H304020 - PowerLite 822+ XGA LCD Projector için: Kullanım Kılavuzu (36 sayfalar), Hızlı Kurulum Kılavuzu (7 sayfalar), Kullanım Kılavuzu (47 sayfalar), Uygunluk Beyanı (4 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), Parça Listesi (1 sayfalar), Ürün Destek Bülteni (41 sayfalar)

Sayfayı Yazdır
Epson V11H304020 - PowerLite 822+ XGA LCD Projector Kullanıcı Kılavuzu
Operating environment
Limitations imposed by a Windows Vista
environment.
When using EMP Monitor under Windows Vista, note the following
limitations.
• You must have administrator authority in order to use Register at
startup on the Environment setup screen of EMP Monitor.
• Even after EMP Monitor has been uninstalled, the settings and log
information will remain on the hard disk. If this information is no
longer required, you may delete the EMP Monitor V4.30 folder.
Provided the default settings were used at installation, this folder can be
found at:
"C:\Users\(User Name)\AppData\Local\VirtualStore\Program
Files\EPSON Projector\EMP Monitor V4.30"

Before starting operations

Check the following points before starting up EMP Monitor.
• EMP Monitor must be installed on the computer to be used for
monitoring and control.
• The computer and the projectors must be connected to the network.
• If using Windows 2000/Windows NT4.0/Windows XP/Windows
Vista, the computer must be started up in Administrator mode.
• Depending on the projector model, a commercially-available serial
TCP/IP conversion adapter and a connection cable are required in
order to use EMP Monitor. s Projector User's Guide "
Make the settings for the serial TCP/IP conversion adapter before
connecting to the projector.
8