MSI MS-9896 Manuel - Sayfa 38

Sunucu Panosu MSI MS-9896 için çevrimiçi göz atın veya pdf Manuel indirin. MSI MS-9896 45 sayfaları. Industrial computer board
Ayrıca MSI MS-9896 için: Kullanıcı Kılavuzu (45 sayfalar)

Sayfayı Yazdır
MSI MS-9896 Manuel
BIOS Setup
This setting specifies the transfer rate (bits per second, data bits, parity, stop
bits) of Console Redirection.
▶ Flow Control
Flow control is the process of managing the rate of data transmission be-
tween two nodes. It's the process of adjusting the flow of data from one
device to another to ensure that the receiving device can handle all of the
incoming data. This is particularly important where the sending device is ca-
pable of sending data much faster than the receiving device can receive it.
▶ VT-UTF8 Combo Key Support
This setting enables/disables VT-UTF8 Combo Key Support.
▶ Recorder Mode, Resolution 100x31
These settings enable/disable the recorder mode and the resolution
100x31.
▶ Legacy OS Redirection Resolution
This setting specifies the redirection resolution of legacy OS.
▶ Putty KeyPad
This setting specifies the type of Putty KeyPad.
▶ Redirection After BIOS POST
This setting specifies the Redirection configuration after BIOS POST.
[Disable]
[Boot Loader]
[Always Enable]
▶ Smart Fan Configuration
▶ Smart FAN1 Target
Controls FAN1 fan speed automatically depending on the current temperature
and to keep it with a specific range. If the current CPU temperature reaches the
target value, the smart fan function will be activated.
▶ Min Speed (%)
These items allow users to select how percentage of speed for the FAN1.
3-10
Turn off the redirection after POST
Set the Redirection to be active during POST and Boot
Loader
Set the Redirection to be always active