Epson WorkForce 600 Series İşlev Kılavuzu - Sayfa 21

Yazılım Epson WorkForce 600 Series için çevrimiçi göz atın veya pdf İşlev Kılavuzu indirin. Epson WorkForce 600 Series 28 sayfaları. Using the control panel for wireless network installation
Ayrıca Epson WorkForce 600 Series için: Ağ Kurulum Kılavuzu (41 sayfalar), Kullanıcı Kılavuzu (34 sayfalar), Kullanıcı Kılavuzu (38 sayfalar), Kartuşların Değiştirilmesi (2 sayfalar), Önemli Kurulum Bilgileri (2 sayfalar), Teknik Özellikler (2 sayfalar), Buradan Başlayın Kılavuzu (9 sayfalar), Ürün Destek Bülteni (5 sayfalar)

12. Click

13. Click

again to close the EPSON Scan Settings window.

Note:

If the printer's IP address changes, you will need to repeat steps 1 through 13

to reconfigure Epson Scan network settings.

You're ready to scan and print. See your printed documentation and on-screen

Epson Information Center for details.

Troubleshooting

If you have problems setting up or using your product on a network, check these

sections for help:

■

"Setup Problems" below

■

"Printing Problems" on page 23

■

"Scanning Problems" on page 24

This section also explains how to print a Network Status Sheet (see page 25) and

reset network settings (page 26).

Software installation failed

Reset the printer's network settings (see page 26) and perform a first-time

installation of the printer and software (see page 3).

Cannot connect to or find the wireless router or access point

■

Try connecting to the wireless router or access point with your computer or

another device to confirm that it is working correctly.

■

Make sure that the printer is within range of your wireless router or access

point.

■

Avoid placing the printer near a microwave oven, 2.4 GHz cordless phone, or

large metal object such as a filing cabinet.

Troubleshooting