AEO RX144E Kullanım Kılavuzu - Sayfa 8

Alıcı AEO RX144E için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AEO RX144E 9 sayfaları. Mini micro receiver

Thank you for choosing AEORC mini micro receiver, this receiver integrates 2-3S/15A

brushless ESC with 5V/2A BEC, please read this document carefully before use.

Version selection

RX44x series include below 4 versions for choice, please understand the corresponding basic functions

according to below form.

RX442

RX444

RX445

RX446

Basic Data

Size： 28.0*18*9.8mm（without wire）

Weight： 5.2g（without wire） 7.1g（with wire）

Working voltage：7.4-12.6V

Built-in ESC：15A 2-3S ESC BEC: 5V/2A

Over voltage protection：without 6CH servo signal output （standard servo plug）

Receiver interface definition

Combine receiver and transmitter

1.Turn on the transmitter and power the receiver.

2.Press the binding button and holding, after about 2s, the red LED of receiver will flash from slow to

quick, then loosen the binding switch, at present, come into binding mode.

3.If necessary, please set up the transmitter to bind.

4.If the binding is successful, according to different types of remote transmitters , there will

be a variety of different LED light feedbacks, including but not limited to the following three LED light

flashing methods. Please confirm according to the actual remote control whether the frequency

matching is successful or not.

AEO RX44x Series 6CH Mini Micro Receiver

Protocol

15A/2-3S brushless ESC

S-FHSS

DSMX/2

FRSKY-D16

FRSKY-D8

(Integrates 2-3S/15A brushless ESC)

Instruction Manual

TELEM

√